Rig Expert AA-600 Antenna Analyser USED | 12 Months Warranty
The RigExpert AA-600 and AA-1000 are powerful antenna analyzers designed for testing, checking, tuning, or repairing antennas and antenna feedlines, Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays, are key features of these analyzers that significantly reduce the time required to adjust an antenna. Easy-to-use measurement modes, as well as additional features such as connection to a personal computer, make RigExpert AA-600 and AA-1000 attractive for professionals and hobbyists.
Both AA-600 and AA-1000 are available in non-US versions (with the ability to display the Smith chart) and the US version (displaying a polar chart instead).
The following tasks are easily accomplished by using these analyzers: Rapid check-out of an antenna,
- Tuning an antenna to resonance,
- Antenna SWR and impedance measurement and comparison before and after specific events (rain, hurricane, etc.),
- Making coaxial lines or measuring their parameters,
- Cable testing and fault location,
- Measuring capacitance or inductance of reactive loads.
RigExpert AA-35ZOOM | Antenna Analyser | LAMCO Barnsley
RigExpert AA-35ZOOM | Antenna Analyser | LAMCO Barnsley
The AA-35 ZOOM is a portable, self-calibrating analyzer, designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 35 MHz, with incredible ZOOM capability.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
Frequency range: 0.06 to 35 MHz
Frequency entry: 1 Hz resolution
Measurement for 25, 50, 75 and 100-Ohm systems
SWR measurement range: 1 to 100 in numerical modes,
1 to 10 in chart modes
SWR display: numerical or analog indicator
RigExpert AA-55ZOOM | Antenna Analyser | LAMCO Barnsley
RigExpert AA-55ZOOM | Antenna Analyser | LAMCO Barnsley
This analyser is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
RigExpert AA-230ZOOM | Antenna Analyser | LAMCO Barnsley
RigExpert AA-230ZOOM | Antenna Analyser | LAMCO Barnsley
This analyser is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
A built-in ZOOM capability makes graphical measurements especially effective.
An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
RigExpert AA-230 ZOOM – In the package
- RigExpert AA-230 ZOOM
- N Male SO-239 Female adaptor
- USB cable
- Soft case
- User’s manual
- Alkaline batteries
|
RigExpert AA-1000 | Antenna Analyser | LAMCO Barnsley
RigExpert AA-1000 | Antenna Analyser | LAMCO Barnsley
The RigExpert AA-1000 is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna.
Easy-to use measurement modes, as well as additional features such as connection to a personal computer make RigExpert AA-600, AA-1000 and AA-1400 attractive for professionals and hobbyists.
AA-600, AA-1000 and AA-1400 are available in non-US version (with ability to display Smith chart) and US version (displaying a polar chart instead).
The following tasks are easily accomplished by using these analyzers:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
- Making coaxial lines or measuring their parameters
- Cable testing and fault location
- Measuring capacitance or inductance of reactive loads
DX Covers Radio Cover SPE Expert 1.3K FA
DX Covers Radio Cover SPE Expert 1.3K FA
DX Covers Radio Cover SPE Expert 1.3 K FA
DX Covers Yaesu Radio dust cover. The unit is manufactured from leatherette with a soft felt lining.
The back of the cover is left open so all cables can remain plugged in.
The front of the cover is embroidered with the logo and model number.
All of our covers have their respective manufacturers approval to use the copyrighted branding.
Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
LAMCO New/Second Hand Twelve Months Warranty.
Near Jnc 36 M1 Motorway.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .
We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!
SPE EXPERT 2K-FA – 2 KW Solid State Linear Amplifier
Factory Order. Delivery is estimated to be ten weeks.
Call our sales line to discuss your order. 01226 361700
SPE EXPERT 2K-FA – 2 KW Solid State Linear Amplifier
SPE EXPERT 2K-FA – 2 KW Solid State Linear Amplifier
- The smallest in its class.
Built-in Power supply and Automatic Antenna Tuner.
Dimension: L 38, H 18.3, P 43 cm (14.96” W, 7.20” H,16.93” D) (connettors included).
Weight: approx: 25 Kg.(55lbs).
- The most technologically advanced in the world
Two powerfull CPUs are used.
Over 35,000 lines of software for performance that cannot be found in any other amplifier.
- Fully Automatic
Easy connection with all models “ICOM, YAESU, KENWOOD, TEN-TEC, FlexRadio ELECRAFT” for immediate management of the bands, tuner and antennas.
Same performance with all makes or homemade rigs.
The operator has only to move the “Frequency Tuning Knob” in the transceiver!!!
- Wide frequency coverage
1.8 MHz to 50 MHz including WARC bands.
- Fully solid state
Up to 2 KW pep SSB, CW out; 50 MHz included.
MAX / MID (1KW) / LOW (500W) power selected according to the operator SSB/CW power requirement, for digital modes and for linear protection (automatic).
No heating time, immediately ready!
Virtually limitless life of the amplification devices ((6 MOSFETs MRF151G).
- Automatic Antenna Tuner built-in
Capable of matching 3:1 SWR on HF, and 2.5:1 SWR on 6 meters.
Capable of programmable switching of 6 antennas (SO239 connectors).
Up to 3 antennas for the same band.
Management of the SteppIR / Ultrabeam antennas (tuneable).
Measure also the SWR of the antenna / cable system.
Bands, Antennas, Tuning conditions are changed in 10 msec.
Bands, Antennas and Tuning conditions are managed also in “STBY“ to support the exciter only.
Max. attenuation 0.8 dB.
Bypass capability.
Remotable (option).
- Two inputs available.
SO239 connectors.
- High power gain (up to 14.5 dB).
In “OPERATE“ the required drive power is automatically set with an ALC connection and in “STANDBY“ the exciter is then automatically reset to full power.
- Very clean and low distortion output!
Spurious emissions less than -60 dB ( 50 MHz –65 dB ).
3rd order distortion (two tone test) 36 dB typ.
- Input 50 ohm always perfectly matched
SWR less than 1.2:1.
- Fully protected
Temperature, Over-Voltage, Over-Current, SWR, Reflected Power, Max RF Tuner Voltage, Over-Drive, Amp. The correct parameters are continuously monitored.
The same protection is realized in two different ways:
· Via hardware circuits (HW) to assure great speed.
· Via the software (SW), to assure great accuracy.
Thanks to the SW, transmit relay changeover is carried out with zero current at the contacts.
- Full break-in operation (QSK)
- Quiet operation.
Linear management of the speed of the cooling fans of the heatsink.
In the power supply, fans speed is reduced during the reception.
Since, considering the big power developed, a significant amount of heat must be removed, every precaution is used to keep the lowest possible the noise of the fans.
- Continuous use
“MAX” mode: SSB / CW unlimited.
Automatically switches to “MID” for a while if, in “MAX”, a continuous signal (RTTY) is transmitted.
“MID” “LOW” modes, RTTY unlimited.
- Switching power supply.
Continous input between 190 – 255 Vac, 47-63 Hz.
PFC (Power Factor Correction).
- The linear can be switched ON / OFF also switching ON / OFF the exciter.
- With a large LCD display is possible to have a great deal of information
W pep out, V pa, I pa, W, Power gain, Temperatures, SWR (after and before the ATU), Input setting, CAT setting, Band and other indications including an alarms log.
- Easy to operate
Powerful SW gives you a user-friendly unit.
- USB port.
For remote control.
For new SW releases download.
- Easy transportation
A sturdy carry-bag is supplied for “QSY, FIELD DAY, DX’ PEDITIONS etc.“.
- Certifications :
CE, FCC.
AOR TE-8200 & EM-8200 Options USED | 12 Months Warranty
The EM-8200 External Memory Card is designed specifically for the AR-8200 and AR-8200-S2 models. This external memory slot card provides additional storage capacity for these advanced radio scanners, allowing users to store more frequencies, channels, and settings. With the EM-8200, users can expand the memory of their AR-8200-8200-S2 devices, enhancing their overall scanning experience.
Installing the EM-8200 External Memory Card is simple and requires no technical expertise. Users can easily insert the card into the external memory slot of their AR-8200 or AR-8200-S2 radio scanners. Once inserted, the device automatically recognizes the additional storage capacity provided by the EM-8200, enabling users to save more radio frequencies and other vital data.
Overall, the EM-8200 External Memory Card is a valuable accessory for owners of the AR-8200 and AR-8200-S2 models. By expanding the memory capacity of these radio scanners, users can customize their scanning experience and store a more incredible amount of data. With the EM-8200, AR-8200-8200-S2 users can optimize their devices for a more efficient and personalized scanning operation.
The AOR TE-8200 Tone Eliminator Card for AR-8200-8200-S2, Tone eliminate slot card for AR-8200-8200-S2, The TE8200 is a valuable tool that enhances the functionality of the AR8200 and AR8600 by allowing them to filter out specific transmissions that could disrupt the scanning and searching processes. This feature is handy when dealing with constant tones emitted by public utilities and railways, which can be tiresome to monitor without the assistance of the TE8200. With 256 available values ranging from 0 to 255, the tone eliminator offers users a wide range of options. These values correspond to frequencies between 0.4 to 4.2 kHz, enabling precise customization of the filtering process. It’s important to note that while the TE8200 eliminates the specified tones from triggering the squelch, the original audio signal is still transmitted to the speaker. By utilizing the TE8200, users can ensure a more streamlined scanning and searching experience, as the device automatically resumes these functions when encountering the selected tones. This reduces the burden of constantly monitoring unwanted transmissions and allows for more efficient use of the AR8200 and AR8600 receivers.
