LDG AT-897 Auto Tuner USED | 12 Months Warranty
£189.00
Out of stock
Let me know when it's in stock:
Description
LDG AT-897 Auto Tuner USED | 12 Months Warranty
LDG AT-897 Plus Antenna Tuner for FT-897, Used AT-897 Plus Autotuner. If you own a Yaesu FT897 and want a broad-range automatic antenna tuner, look no further! The AT-897Plus Autotuner mounts on the side of your FT-897, just like the original equipment. We even added the ability to mount the “feet” on the tuner’s side so that you can safely set it down and not worry about scratching the case when transporting your rig by the handle.
The AT-897Plus is microprocessor-controlled and features the tuning ability our customers have come to expect from our products. The tuner has a front panel button to initiate the tuning sequence while lowering the RF power to 25 watts. If pressed momentarily, the tuner will bypass. The red LED lights while the tuner is active.
The AT-897Plus takes power directly from the FT-897’s CAT port and provides a second CAT port on the tuner’s back, so hooking up another CAT device couldn’t be easier.
If you are a QRP enthusiast or plan on operating via internal batteries, the AT-897Plus is your tuner! It does not need a fan, let alone one constantly running. Current consumption when it is tuned is in the micro-amp range. Since we use latching relays, you can even remove power from the tuner after you have tuned on the band you will operate on!
The FT-897 is a great radio. The FT-897 / AT-897Plus combination makes a fantastic shack!
Specification: Microprocessor controlled 200 fast memories Switched L tuning network Mounts on the side of the Yaesu FT-897 with four M3-0.5×10 screws (included) Dual function tune control button Continuous coverage 1.8 to 54 MHz Power rating HF: 0.1 to 100 Watts Latching Relays Provides extra CAT Port Tuning time: 1 to 7 seconds, four average Antenna impedance: 6 to 800 Ohms (Approximately up to 10:1 SWR) Tunes nearly any coax fed antenna. Use optional Balun for long wires. Power requirements: 11 to 14 volts DC @ 300 milliamps during tune Operating voltage supplied via the CAT Port (cable provided with tuner) Enclosure sizes: 11.5D x 3.25H x 1.5W (measured in inches) Weight: 2 pounds