Search Results for: vine antennas

ICOM IC-705 HF/50/145/430Mhz Portable Transceiver+ Rig Case Lite

ICOM IC-705 | HF/VHF/UHF SDR QRP Portable Transceiver | LAMCO Barnsley

Icom IC-705 HF VHF UHF All Mode Portable Transceiver

ICOM IC-705 Portable Transceiver LAMCO Barnsley HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Icom innovation leading the way in portable SDR operation.

Icom IC-705 HF/50/145/430MHz All mode D-STAR SDR 10 Watts.

icom hf 50 145 430 mhz all mode sdr portable d-star transceiver

IC-705

Icom IC-705 HF/VHF/UHF Mobile TransceiverThe new portable HF/VHF/UHF IC-705 has many great features such as SDR platform, internal battery, GPS, Bluetooth and D-STAR, all in a compact and lightweight body. The Icom IC-705 uses the same 4.3 inch colour touch screen display as the best selling IC-7300 and IC-9700 featuring real-time spectrum scope and waterfall display.

HF/50/144/430 MHz Multimode Operation
From HF to 50/144/430 MHz, you can enjoy a variety of bands in D-STAR DV, SSB, CW, AM and FM modes. The IC-705 receives continuously from 30 kHz through the 144 MHz band. You can also enjoy FM broadcast and Airband reception.

RF Direct Sampling System
The Icom IC-705 uses the RF direct sampling method* matured in the IC-7300, IC-7610, and IC-9700. This method greatly reduces distortion. The high speed /high resolution real-time spectrum scope and waterfall display are incorporated in a compact design for the first time in this class.
* Down-conversion IF sampling method for 25 MHz and above

Real-Time Spectrum Scope and Waterfall Display
The IC-705 inherits the performance and functions of the highly-acclaimed IC-7300 and IC-9700 scopes. You can visually figure out the band condition and check clear frequencies. It takes you to the next level beyond traditional field operation.

Large Touch Screen Colour Display
The large 4.3 inch colour TFT touch LCD is the same size as the IC-7300 and IC-9700. It offers intuitive operation of the IC-705’s functions, settings, and various operational visual aids, such as the band scope, waterfall, and audio scope functions.

Compact and Lightweight Design
“Base station radio” performance and functions are packaged in a compact size of approximately 20 cm, 7.9 in (W) × 8.35 cm, 3.3 in (H) × 8.2 cm, 3.2 in (D). The weight is approximately 1.1 kg (including BP-272). Its compact and lightweight design enables you to hold it with one hand.

BP-272 Li-ion Battery Pack or 13.8 V DC External Power Supply
The Icom IC-705 utilises the high capacity Li-Ion battery from the ID-51A and ID-31A handheld radios. A 13.8 V DC external power supply can be used for operation and charging of the BP-272.

 

Maximum Output Power 5 W (BP-272), 10 W (13.8 V DC)
In portable mode, the Icom IC-705 has a maximum output power of 5 W from the BP-272 which can last approx. 3 hours*. This is perfect for true 5 W QRP as well as the 0.5 W QRPp operations. Once you setup with a 13.8 V DC power source, you have up to 10 W.
* TX : RX : standby = 1 : 1 : 8 (The Power Save function ON, in the FM mode)

Supports Connections Using WLAN/Bluetooth® Technologies
Utilises WLAN/Bluetooth® technologies for linking and remote control*. The VS-3 headset (optional) enables more comfortable operation via Bluetooth®
* Those features will be available with future firmware upgrades.

GPS Functions
An internal GPS receiver and antenna enhance your operations by providing location logging*, RX/TX locations via D-PRS®, “Near Me” repeater search/scan, QSO recording with metadata*, and internal clock synchronization.
* Micro SD required

microSD Card Slot
The microSD card slot enables the storage of user-profiles, QSO recording, TX voice memory keyer, RTTY logging, GPS data, screen capture, firmware upgrades, and programming.
* microSD card is not supplied.

Micro USB Connector
In addition to audio and rig control, the micro USB port allows charging capability, making digital modes easy with minimal cables.

D-STAR Functions
Enjoy the latest G3 Gateway and DV mode features with the IC-705. Have direct access to the D-STAR network with Terminal/Access point modes. Additionally, the IC-705 has the Photo Share feature introduced with the IC-9700. Share photos, without the need of a computer with other users with an IC-705 and IC-9700.

 

Programmable Speaker/Microphone
Enjoy portable operations with the supplied HM-243, programmable speaker/microphone. Perfect for operation with the IC-705 safely secured in the optional LC-192 backpack. User assignable buttons put functions like frequency and volume adjustments at the tip of your fingers, without removing your backpack.

Optional LC-192 Backpack, Ideal for Field Operations
Designed to be the “Ultimate”, must have accessory for the IC-705, the LC-192 is the perfect utility backpack. Features like a safety strap, with a 1/4”-20 mounting lug to keep the IC-705 from accidentally falling out of the custom radio compartment to the user-adjustable internal panels for custom compartments for antennas, battery packs, or other items necessary for an afternoon SOTA activation.

 

Icom IC-705 Specification

  • HF/50/144/430 MHz Multimode Operation
  • RF Direct Sampling System
  • Real-Time Spectrum Scope and Waterfall Display
  • Large Touch Screen Colour Display
  • Compact and Lightweight Design
  • BP-272 Li-ion Battery Pack or 13.8 V DC External Power Supply
  • Maximum Output Power 5 W (BP-272), 10 W (13.8 V DC)
  • Supports Connections Using WLAN/Bluetooth® Technologies
  • GPS Functions
  • microSD Card Slot
  • Micro USB Connector
  • D-STAR Functions
  • Programmable Speaker/Microphone
  • Optional LC-192 Backpack, Ideal for Field Operations

https://icomuk.co.uk/IC-705-HF-VHF-UHF-Mobile-Transceiver/3977/1338/14/

https://icomuk.co.uk/files/icom/PDF/newsFile/IC-705_Tokyo_Hamfair.pdf

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
Alt Text LAMCO New/Second Hand Twelve Months Warranty. Near The Alhambra Shopping Centre. Barnsley, South Yorkshire, UK. Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK. Amateur radio Dealers, HAM radio dealers UK .We are a family business supplying world leading amateur radio equipment. We are small enough to care and large enough to cope!

IC-705 Optional Accessories

https://www.hamradio-shop.co.uk/product/mat-705plus/

https://www.hamradio-shop.co.uk/product/icom-al-705/

https://www.hamradio-shop.co.uk/product/ic-705-dx-cover/

https://www.hamradio-shop.co.uk/product/icom-mbf-705/

https://www.hamradio-shop.co.uk/product/icom-bp-307/

https://www.hamradio-shop.co.uk/product/vine-antenna-rst-705-9a/

https://www.hamradio-shop.co.uk/product/vine-antenna-rst-705-bnc/

https://www.hamradio-shop.co.uk/product/vine-antennas-rst-bbb/

https://www.hamradio-shop.co.uk/product/icom-bp-272/

Icom IC 705, Icom IC705, IC 705, Icom IC705, IC705 HF VHF UHF All Mode Portable Transceiver,

ICOM IC-7300 + SM-30 + SP-38 Combo

7300 SM30 SP38 Combo deal from ICOM UK supplied by LAMCO Barnsley

ICOM IC-7300 + SM-30 + SP-38 Combo LAMCO Barnsley

ICOM IC-7300 + SM-30 + SP-38 Combo

LAMCO Barnsley

 

 Icom IC-7300-lamco-barnsley

[wa-wps id=’16141′]

Innovative IC 7300 HF/50/70MHz Transceiver Launched at Tokyo Ham Fair 2015

Icom Inc. had a huge amount of interest on its stand at last weekend’s Tokyo Ham Fair 2015 with the timely unveiling of the New IC-7300 HF/50/70MHz Transceiver.

The launch, which caught most people off guard, saw the manufacturer introduce a new mid-sized base station transceiver incorporating the latest RF direct sampling system, a real first for an Amateur radio transceiver*.

The IC-7300 transceiver, an aesthetically, attractive looking base station, features a 4.3-inch touchscreen colour TFT LCD screen with a high-performance real-time band scope.

Another first for an Amateur radio transceiver, the IC-7300 uses an RF Direct Sampling System, a technology normally seen in Software Defined Radios.

RF signals are mostly processed through the FPGA (Field-Programmable Gate Array), rather than by physical devices enabling high-performance real-time spectrum scope in a compact body.

The Icom IC-7300 includes a built-in integrated wide-frequency Automatic Antenna Tuner making ideal for field operation.

The radio provides 100 watts output power on HF/50MHz bands and 50 watts on 70MHz (European versions only).

The High-quality real-time spectrum scope Now, a serious spectrum scope is NOT a “privilege” of high-grade models.
The IC-7300 comes loaded with high-resolution real-time spectrum scope.
Its real-time spectrum scope with waterfall function provides top-level performance in resolution, sweep speed and dynamic range.

Real-time spectrum scope capabilities*

Number of dots shown at the 60 dB level, when receiving a single carrier.

RF Direct sampling system — a first in Amateur Radio*Instead of the conventional superheterodyne system, the IC-7300 utilizes the RF direct sampling system — a real first in an amateur radio transceiver.

This technology is seen in Software Defined Radios and other radio equipment.

RF signals are mostly processed through the FPGA (Field-Programmable Gßate Array), making it possible to eliminate physical mixer and filter devices and offer a high performance real-time spectrum scope in a compact body.
* Researched by Icom, among major amateur radio manufactures.

Class leading phase noise characteristics.Overcoming cost and performance limitations of the superheterodyne system, the RF direct sampling system pursues ideal high performance phase noise.

As the result, compared to the IC-7200, the IC-7300’s phase noise characteristics are improved about 15dB (at 1kHz frequency offset).

This superior phase noise reduces noise components in both receive and transmit signals.

Phase noise characteristics comparison.

Large touch screen color TFT LCD.

The IC 7300 has a large color TFT LCD and it can be used as a touch screen.

This user-friendly interface provides intuitive operation.

Using the software keypad of the touch screen, you can easily set various functions and edit memory contents.

Multi-dial knob for smooth operation.When you push the multi-dial knob, menu items are shown on the right side of the display.

You can select an item with a touch of the screen and adjust levels by turning the multi-dial knob.

This combination of the multi-dial knob and touch screen offers quick and smooth operation.

Built-in automatic antenna tuner.

The high-speed automatic antenna tuner is built into a compact chassis (240 (W) × 238 (D) × 95 (H) mm; 9.45 × 9.37 × 3.74 in).

Light weighgt you can easily carry the radio and enjoy field operation.

Easy-to-hear sound quality.

To offer optimum sound quality, a new speaker unit is employed and is allocated sufficient space in the sturdy aluminum die-cast chassis.

Other Icom IC-7300 features.

Voice memory function.

Memory keyer functions for CW and RTTY.RTTY decode log function.

Screen capture.SD card slot.

USB for CI-V and audio input/output.

Large cooling fan system.function meter.

101 memory channels (99 regular and 2 scan edge channels).

Multiple CW functions.

Digital noise reduction.

100W output power on HF/50MHz bands and 50W on 70MHz band (Europe versions only).

SSB, CW, RTTY, AM and FM modes.

Scope system FFT.

Reference level adjustment Yes (–20dB to+20dB).

Span width 5kHz–1000kHz Maximum hold indication Yes(10 sec., continuous).

Resolution* 1 dot minimum (approx.) Average indication Yes.

Waveform display area(Vertical axis) 80 dB (indicated area).

Touch screen operation Yes(Changing frequency).

VBW adjustment Yes.

Icom IC-7300 Optional Accessories Are As Below.-

If You Fancy Something A Little Larger, Try This New Model.-

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.

Alt Text LAMCO New/Second Hand Twelve Months Warranty.

Near The Alhambra Shopping Centre.Barnsley, South Yorkshire, UK.Amateur Radio Sales.

HAM Radio Sales.

We are Premier Dealers For Icom, Kenwood & Yaesu.

hamradio-shop is my favourite HAM store!HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.

Amateur radio Dealers, HAM radio dealers UK.

We are a family business supplying world leading amateur radio equipment.

We are small enough to care and large enough to cope!

Icom IC 7300,

Icom IC-7300,

IC-7300,

IC 7300,

Icom SDR Transceiver,

HF/50/70MHz,

Internal ATU,

7300,

Yaesu FTDX101MP 200 Watts HF/50/70Mhz

FTDX101MP DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Yaesu FTDX101MP 200 Watts HF/6m/4m All Mode New Transceiver .

Yaesu FTDX101MP 200 Watts HF/6m/4m All Mode New Transceiver

Yaesu FT-DX101MP

Yaesu FTDX101MP

In addition to the Narrow band SDR receiver, that boasts overwhelming Basic Performance, the Hybrid Configuration Digital Processing with Direct Sampling SDR permits inclusion of the superb Real-Time Spectrum Scope. *300Hz and 1.2kHz roofing filters (Optional)

Narrow band SDR

Crystal Roofing Filters produce phenomenal Multi-signal characteristics

The Down Conversion type receiver construction is similar to the FTDX5000. The first IF frequency is 9 MHz, and a low noise figure dual gate MOS FET, D-quad DBM (Double Balanced Mixer) with excellent intermodulation characteristics, is implemented in the mixer section. Narrow band SDR configuration makes it possible to use the narrow bandwidth crystal roofing filters that have the sharp shape factor.  This achieves the amazing multi-signal receiving performance when confronted with the most challenging on-the-air interference situations.

In addition to IF down-conversion, The Yaesu FTDX101MP receivers implement the YAESU legendary powerful RF Front-Ends, outstanding low-noise Local Oscillators, roofing filters with sharp shape factors, and the latest circuit configurations that we carefully selected for all circuit elements. Consequently, the proximity BDR (Blocking Dynamic Range) in the 14 MHz band reaches 150 dB or more, the RMDR (Reciprocal Mixing Dynamic range) reaches 123 dB or more, and the 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 110 dB or more.

Narrow band SDR + Direct Sampling SDR

Emphasizes Excellent Receiver Performance and Hybrid SDR Functionality

Digital Processing Generated Real-Time Spectrum Scope

The Narrow band SDR receiver removes strong out of band signals by using a superheterodyne method, with narrow band roofing filters which significantly attenuates unwanted out of band frequency components, and the wanted signals within the passband are converted to digital by a high resolution 18-bit A/D converter and sent to an FPGA (Field Programmable Gate Array) for signal processing.

The  Yaesu FTDX101MP series uses a hybrid SDR configuration that integrates a direct sampling SDR receiver in order to view the entire band status in real time, with the excellent dynamic receiver performance achieved by the narrow band SDR receiver circuit.

By using this hybrid SDR design, the overall performance of the entire FTDX101 receiver system is improved. The Direct Sampling SDR driving the real time Spectrum display with its large dynamic range enables the weakest signal to be observed on the display when it appears and the Narrow Band SDR enables that signal to be selected, filtered and then decoded.

If there is powerful AM station near your location or in challenging operating situations where there are a lot of strong signals in the band from Contests, DX-pedition activities, those signals outside the pass band can be attenuated by the very effective roofing filter in the front stage of the A/D converter. This reduces the signal load on the A/D converter which is a bottleneck from the viewpoint of the entire receiving circuit. Therefore, interference is reduced making it is possible to continue to operate even under such difficult conditions.

Truly Quiet and Clear Reception

Ultra Low-Noise Local Oscillator System; 400MHz HRDDS (High Resolution Direct Digital Synthesizer)

The C/N ratio (signal-to-noise ratio) of the local signal injected into the 1st mixer is an important factor in improving the proximity multi-signal characteristics. The local circuit of the FTDX101 series uses the 400 MHz HRDDS (High Resolution Direct Digital Synthesizer) method that was used in the FTDX5000. This circuit configuration is different from a generic PLL that generates a local signal. Creating the local signal by directly dividing the high frequency of 400 MHz, the theoretical PLL lockup time becomes zero, and C/N deterioration by the lockup time does not occur.

The significant improvement of the C/N characteristic by directly dividing the frequency contributes dramatically to reduce the noise in the entire receiver stage, and also improve the BDR (Blocking Dynamic Range) characteristic in strong signals proximity.

In the FTDX 101 series, in addition to the adoption of the 400 MHz HRDDS, the latest circuit configurations that reduced noise, and carefully selected components are used. As a result, the phase noise characteristic of the local signal achieves an excellent value of -150 dBc/Hz or less at 2kHz separation.

This low-noise, high-quality local signal contributes significantly to the multi-signal and the ultra-close signal proximity (such as a few hundred hertz) characteristics.

Unparalleled -70 dB Maximum Attenuation VC-Tune

Newly developed VC-Tune RF Preselector with high precision stepping motor drive provides outstanding attenuation characteristics

Frequency automatic adjustment RF Preselector VC-Tune

In the Yaesu FTDX101MP series, a next-generation RF preselector VC-Tune further improves the high-performance RF μ (mu)-Tuning system adopted in FTDX9000. Using a remarkable miniaturization design while producing unparalleled characteristics and maximum attenuation of -70 dB.

Newly developed VC-tune circuit drives a variable capacitor (VC) with a high precision stepping motor and achieved remarkable miniaturization over μ-tuning system.

VC-Tune has no annoying steps or switching relays by continuously covering the band with a variable capacitor driven by a high-precision stepping motor following the frequency. The conventional preset method of switching coils and capacitors with relays is eliminated.

When there are multiple strong signals in the band, press the “VC TUNE” key and turn the MPVD (Multi-Purpose VFO Outer Dial) ring on the VFO dial to activate the high-precision stepping motor to adjust the variable capacitor. Fine tune to the optimum point that attenuates the strong signal in the band while operating the VFO dial.

VC-Tune stores the last tuning point for each band, so when broadcast-like signals are periodically transmitted on the same frequency, that frequency can always be attenuated by setting the VC-Tune once.

The Highest Transmit Signal Purity

High-Quality transmission with outstanding phase noise characteristics

Transmit Final Stage produces the Highest Signal Purity

The excellent C/N characteristics provided by the 400MHz HRDDS (High Resolution Direct Digital Synthesizer) used in the local oscillator circuit also contributes significantly to the transmitter section.  In a generic circuit, noise or distortion may occur depending on the circuit configuration and the components, up to the final stage that is producing the transmit signal, even if the local signal is of high quality.  In the FTDX101, a thorough examination of each element up to the final TX stage was made. The clock that divides and distributes the local signal from the 400MHz HRDDS circuit to each block, as well as the FPGA, D/A converter, the final power amplifier etc., and carefully selecting the latest circuit configurations to improve the C/N characteristics of the entire transmitter block. The transmit signal of the Yaesu FTDX101MP is directly generated from a 16-bit D/A converter without passing through a mixer circuit, therefore distortion and noise are significantly suppressed.

As a result, high-quality local signal characteristics are maintained without degradation to the final stage, and the transmission phase noise characteristics achieve -150 dBc/Hz at 2kHz separation.

The Yaesu  FTDX101MP transceiver user will appreciate the finest performance with a high-purity transmission signal.

New Generation Scope Display 3DSS

Intuitively grasp changes in the strength of the signals

Newly developed 3DSS (3-Dimentional Spectrum Stream) system

in addition to a conventional Waterfall display

7-inch TFT Color Touch Panel Display

Size: 7-inch Wide

Resolution: 800 x 480 pixels

ABI (Active Band Indicator) & MPVD (Multi-Purpose VFO Outer Dial)

Deliver Superior Operability and Visibility plus Introduce Numerous Functions

Front Panel Design Emphasizes Solid Superior Touch and Operability

Primary important operation functions such as the Main VFO dial, VC-TUNE, WIDTH/SHIFT are arranged near the center of the pane for easy access.

Band select keys are placed as a row of ABI (active band indicator) at the top of the VFO dial, with your operating efficiency and comfort.

Even with a Large 7-inch Touch Panel Display, the panel layout emphasizes quick visibility and operability as a First Priority.

ABI (Active Band Indicator)

ABI is arranged as the band select key in the horizontal a row at the top of VFO dial.

When the band selected as MAIN Band, the LED indicates in white, and when the band selected by SUB band, the LED indicates in blue. At the status of transmission, the LED turns red so you can instantly confirm which VFO is transmitting.

In addition, since the orange LED lights up when you press and hold the band key, you can use it to display a band that has an antenna connected or to display a band operated in DX-pedition mode as a memo. Below the band key is a key for selection between transmission and reception of the MAIN and SUB band, and below that, there is a switching key for using the VFO knob on the MAIN or SUB tuning, so, even when the operating split using both MAIN and SUB bands at the same time, the band control can be performed smoothly, and so tuning the wrong band by mistake is reduced.

MPVD (Multi-Purpose VFO Outer Dial)

The MPVD is a large high-grade aluminium multifunctional ring around the outside of the VFO dial. The ring allows control of SUB VFO frequency dial, VC-TUNE, Clarifier and C/S (custom select function). The MPVD is a handy dial that allows you to adjust important functions in ever-changing HF communications without taking your hand off the VFO. The ring has the traditional Yaesu outstanding smooth and solid feeling when used.

PC Remote Control Software to Expand the Operating Range

Even from a distance, Dual Band-Scope Available Comfortable Operation utilizing the advantage of Hybrid SDR

Remote operation connected to LAN or Internet

PC control software performed remote operation of the transceiver from a remote location via the LAN or the Internet is available. (Requires optional external LAN unit)

In remote operation, in addition to the transceiver basic operation, it is compatible with DUAL-BAND scope and versatile displays, enabling comfortable operation. Also, you can enjoy various usages such as monitoring the band condition on a large display at a place away from the shack by connecting to a home LAN.

By communicating of Transmit/receive voice, RF scope, AF scope and CAT command to the transceiver, band status monitor by scope display, various filter settings, interference reduction function etc., can be easily set from PC, and possible to perform comfortable communication.

https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=BA2F414449407A4D3D23461143F88429&DivisionID=65&isArchived=0

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
Alt Text LAMCO New/Second Hand Twelve Months Warranty.
Near The Alhambra Shopping Centre.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store!
HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .
We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!

Yaesu FT-DX101D,

FT-DX101D,

Yaesu FTDX101D,

Yaesu FT-101 D

Yaesu FT-DX101 D,

Yaesu FT-DX101MP,

https://www.hamradio-shop.co.uk/product/yaesu-m-1-lamco-barnsley/

Yaesu FT-4XE | Dual Band Handheld Transceiver

FT-4XE DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Yaesu FT-4XE | Dual Band Handheld Transceiver

Yaesu FT-4XE | Dual Band Handheld Transceiver

Yaesu FT-4V

Yaesu FT-4XE Features

• VHF/UHF Dual Band FM Handheld Transceiver
• Ultimate Compact Design, Measuring W 52 x H 90 x D 30
• One Watt of Powerful and Clear Audio Output from the 36 mm Front Speaker
• 5 Watts of Reliable RF Power within a Compact body
• Three Selectable TX Power settings (5 W (High)/2.5 W (Middle)/0.5 W (Low))
•
Over 15 hours Operating time with Supplied 1,750 mAh Li-ion Battery pack *1
• 3.5-Hour Rapid Charger (SBH-22) Included (Using SBR-28LI)
• QRK (Quick Recall Key): Two User Programmable Keys for Quick Access to Favourite Functions
• One-touch Alarm and Quick HOME Channel Access for Emergency Signalling
• VFO Scan, Memory Scan, Programmable memory scan (PMS), Memory bank scan, and Dual receive
• Large-capacity 200 memory channels
• 3 home channels and 10 pairs of PMS memory channels
• Selectable Frequency Steps (5/10/12.5/15/20/25/50/100 kHz)
• Split Memory (Two different frequencies (TX/RX)
• WX Channels with “Severe Weather” Alert
• VOX Operation with Optional VOX Earpiece Microphone (SSM-512B)
• PC Programmable with Optional Programming Cable (SCU-35)
• Transceiver-to-Transceiver Cloning with Optional Cloning Cable (SCU-36)
• FM Broadcast Receiver Equipped
• ARTS (Automatic Range Transponder System)
• DTMF Operation
• CTCSS/DCS Operation
• Busy Channel Lock-Out (BCLO)
• Battery Saver Function
• Automatic Power-Off (APO) Feature
• Transmitter Time-Out-Timer (TOT)

Single-band Version Also Available 

 

Frequency Ranges: RX 136 – 174 MHz
400 – 480 MHz
FM Broadcast 65 – 108 MHz
TX 144 – 146 MHz
430 – 440 MHz
Circuit Type: Direct-Conversion
Modulation Type: F2D, F3E, F2A
RF Power Output: 5 W/2.5 W/0.5 W
AF Audio Output: 1 W (Max power)
Case Size (W x H x D): 52 x 90 x 30 mm without Knob
Weight (Approx.): 250 g with SBR-28LI and Antenna

 

Official Yaesu Product Page

 

Yaesu FT-4XE,

FT-4XE,

FT 4XE,

FT 4X,

FT-4X,

Yaesu FTDX101D 100 Watts HF/50/70Mhz Transceiver

FTDX101D DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Yaesu FTDX101D HF 50Mhz All Mode 100Watt SDR Transceiver

 

Yaesu FTDX101D HF 50Mhz All Mode 100Watt SDR Transceiver.

Yaesu FTDX101D

 

Named after the well-known FT-101, a corner stone in the history of HF Transceivers,

Create the future of HF communications with the birth of the FTDX101…

In Homage to Yaesu Founder – Sako Hasegawa JA1MP

HF/50MHz transceiver

FTDX101D  100W

The Ultimate

HF/50MHz transceiver

FTDX101D  100W

We believe that hearing a weak target signal in an environment of close strong interference is the most important feat required of HF DX communications equipment in every era. Raising and meeting the goal is the ultimate mission that Yaesu has challenged for over 60 years.

True Performance

Hybrid SDRs (Narrow Band SDR & Direct Sampling SDR)

2kHz RMDR 123dB+

2kHz BDR    150dB+

2kHz 3rd IMDR 110dB+

400MHz HRDDS (High Resolution Direct Digital Synthesizer)

2kHz Phase Noise -150dBc/Hz

VC-TUNE (Variable Capacitor Tune) signal peaking

3DSS (3-Dimensional Spectrum Stream) visual display

Narrow band SDR & Direct Sampling SDR

Emphasizes Basic Performance and Hybrid SDR Functionality

Includes Digital Processing Generated Real-Time Spectrum Scope

Yaesu FTDX101D FEATURES

Hybrid SDR Configuration

In addition to the Narrow band SDR receiver, that boasts overwhelming Basic Performance, the Hybrid Configuration Digital Processing with Direct Sampling SDR permits inclusion of the superb Real-Time Spectrum Scope. *300Hz and 1.2kHz roofing filters (Optional)

Narrow band SDR

Crystal Roofing Filters produce phenomenal Multi-signal characteristics

The Down Conversion type receiver construction is similar to the FTDX5000. The first IF frequency is 9 MHz, and a low noise figure dual gate MOS FET, D-quad DBM (Double Balanced Mixer) with excellent intermodulation characteristics, is implemented in the mixer section. Narrow band SDR configuration makes it possible to use the narrow bandwidth crystal roofing filters that have the sharp shape factor.  This achieves the amazing multi-signal receiving performance when confronted with the most challenging on-the-air interference situations.

In addition to IF down-conversion, The FTDX101D receivers implement the YAESU legendary powerful RF Front-Ends, outstanding low-noise Local Oscillators, roofing filters with sharp shape factors, and the latest circuit configurations that we carefully selected for all circuit elements. Consequently, the proximity BDR (Blocking Dynamic Range) in the 14 MHz band reaches 150 dB or more, the RMDR (Reciprocal Mixing Dynamic range) reaches 123 dB or more, and the 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 110 dB or more.

Narrow band SDR + Direct Sampling SDR

Emphasizes Excellent Receiver Performance and Hybrid SDR Functionality

Digital Processing Generated Real-Time Spectrum Scope

The Narrow band SDR receiver removes strong out of band signals by using a superheterodyne method, with narrow band roofing filters which significantly attenuates unwanted out of band frequency components, and the wanted signals within the passband are converted to digital by a high resolution 18-bit A/D converter and sent to an FPGA (Field Programmable Gate Array) for signal processing.

The FT DX 101 series uses a hybrid SDR configuration that integrates a direct sampling SDR receiver in order to view the entire band status in real time, with the excellent dynamic receiver performance achieved by the narrow band SDR receiver circuit.

By using this hybrid SDR design, the overall performance of the entire FTDX101 receiver system is improved. The Direct Sampling SDR driving the real time Spectrum display with its large dynamic range enables the weakest signal to be observed on the display when it appears and the Narrow Band SDR enables that signal to be selected, filtered and then decoded.

If there is powerful AM station near your location or in challenging operating situations where there are a lot of strong signals in the band from Contests, DX-pedition activities, those signals outside the pass band can be attenuated by the very effective roofing filter in the front stage of the A/D converter. This reduces the signal load on the A/D converter which is a bottleneck from the viewpoint of the entire receiving circuit. Therefore, interference is reduced making it is possible to continue to operate even under such difficult conditions.

Truly Quiet and Clear Reception

Ultra Low-Noise Local Oscillator System; 400MHz HRDDS (High Resolution Direct Digital Synthesizer)

The C/N ratio (signal-to-noise ratio) of the local signal injected into the 1st mixer is an important factor in improving the proximity multi-signal characteristics. The local circuit of the FTDX101D series uses the 400 MHz HRDDS (High Resolution Direct Digital Synthesizer) method that was used in the FTDX5000. This circuit configuration is different from a generic PLL that generates a local signal. Creating the local signal by directly dividing the high frequency of 400 MHz, the theoretical PLL lockup time becomes zero, and C/N deterioration by the lockup time does not occur.

The significant improvement of the C/N characteristic by directly dividing the frequency contributes dramatically to reduce the noise in the entire receiver stage, and also improve the BDR (Blocking Dynamic Range) characteristic in strong signals proximity.

In the FTDX101D series, in addition to the adoption of the 400 MHz HRDDS, the latest circuit configurations that reduced noise, and carefully selected components are used. As a result, the phase noise characteristic of the local signal achieves an excellent value of -150 dBc/Hz or less at 2kHz separation.

This low-noise, high-quality local signal contributes significantly to the multi-signal and the ultra-close signal proximity (such as a few hundred hertz) characteristics.

Unparalleled -70 dB Maximum Attenuation VC-Tune

Newly developed VC-Tune RF Preselector with high precision stepping motor drive provides outstanding attenuation characteristics

Frequency automatic adjustment RF Preselector VC-Tune

In the FTDX101D series, a next-generation RF preselector VC-Tune further improves the high-performance RF μ (mu)-Tuning system adopted in FTDX9000. Using a remarkable miniaturization design while producing unparalleled characteristics and maximum attenuation of -70 dB.

Newly developed VC-tune circuit drives a variable capacitor (VC) with a high precision stepping motor and achieved remarkable miniaturization over μ-tuning system.

VC-Tune has no annoying steps or switching relays by continuously covering the band with a variable capacitor driven by a high-precision stepping motor following the frequency. The conventional preset method of switching coils and capacitors with relays is eliminated.

When there are multiple strong signals in the band, press the “VC TUNE” key and turn the MPVD (Multi-Purpose VFO Outer Dial) ring on the VFO dial to activate the high-precision stepping motor to adjust the variable capacitor. Fine tune to the optimum point that attenuates the strong signal in the band while operating the VFO dial.

VC-Tune stores the last tuning point for each band, so when broadcast-like signals are periodically transmitted on the same frequency, that frequency can always be attenuated by setting the VC-Tune once.

The Highest Transmit Signal Purity

High-Quality transmission with outstanding phase noise characteristics

Transmit Final Stage produces the Highest Signal Purity

The excellent C/N characteristics provided by the 400MHz HRDDS (High Resolution Direct Digital Synthesizer) used in the local oscillator circuit also contributes significantly to the transmitter section.  In a generic circuit, noise or distortion may occur depending on the circuit configuration and the components, up to the final stage that is producing the transmit signal, even if the local signal is of high quality.  In the FTDX101, a thorough examination of each element up to the final TX stage was made. The clock that divides and distributes the local signal from the 400MHz HRDDS circuit to each block, as well as the FPGA, D/A converter, the final power amplifier etc., and carefully selecting the latest circuit configurations to improve the C/N characteristics of the entire transmitter block. The transmit signal of the FTDX101 is directly generated from a 16-bit D/A converter without passing through a mixer circuit, therefore distortion and noise are significantly suppressed.

As a result, high-quality local signal characteristics are maintained without degradation to the final stage, and the transmission phase noise characteristics achieve -150 dBc/Hz at 2kHz separation. FTDX101 transceiver user will appreciate the finest performance with a high-purity transmission signal.

New Generation Scope Display 3DSS

Intuitively grasp changes in the strength of the signals

Newly developed 3DSS (3-Dimentional Spectrum Stream) system

in addition to a conventional Waterfall display

7-inch TFT Color Touch Panel Display

Size: 7-inch Wide

Resolution: 800 x 480 pixels

ABI (Active Band Indicator) & MPVD (Multi-Purpose VFO Outer Dial)

Deliver Superior Operability and Visibility plus Introduce Numerous Functions

Front Panel Design Emphasizes Solid Superior Touch and Operability

Primary important operation functions such as the Main VFO dial, VC-TUNE, WIDTH/SHIFT are arranged near the center of the pane for easy access.

Band select keys are placed as a row of ABI (active band indicator) at the top of the VFO dial, with your operating efficiency and comfort.

Even with a Large 7-inch Touch Panel Display, the panel layout emphasizes quick visibility and operability as a First Priority.

ABI (Active Band Indicator)

ABI is arranged as the band select key in the horizontal a row at the top of VFO dial.

When the band selected as MAIN Band, the LED indicates in white, and when the band selected by SUB band, the LED indicates in blue. At the status of transmission, the LED turns red so you can instantly confirm which VFO is transmitting.

In addition, since the orange LED lights up when you press and hold the band key, you can use it to display a band that has an antenna connected or to display a band operated in DX-pedition mode as a memo. Below the band key is a key for selection between transmission and reception of the MAIN and SUB band, and below that, there is a switching key for using the VFO knob on the MAIN or SUB tuning, so, even when the operating split using both MAIN and SUB bands at the same time, the band control can be performed smoothly, and so tuning the wrong band by mistake is reduced.

MPVD (Multi-Purpose VFO Outer Dial)

The MPVD is a large high-grade aluminium multifunctional ring around the outside of the VFO dial. The ring allows control of SUB VFO frequency dial, VC-TUNE, Clarifier and C/S (custom select function). The MPVD is a handy dial that allows you to adjust important functions in ever-changing HF communications without taking your hand off the VFO. The ring has the traditional Yaesu outstanding smooth and solid feeling when used.

PC Remote Control Software to Expand the Operating Range

Even from a distance, Dual Band-Scope Available Comfortable Operation utilizing the advantage of Hybrid SDR

Remote operation connected to LAN or Internet

PC control software performed remote operation of the transceiver from a remote location via the LAN or the Internet is available. (Requires optional external LAN unit)

In remote operation, in addition to the transceiver basic operation, it is compatible with DUAL-BAND scope and versatile displays, enabling comfortable operation. Also, you can enjoy various usages such as monitoring the band condition on a large display at a place away from the shack by connecting to a home LAN.

By communicating of Transmit/receive voice, RF scope, AF scope and CAT command to the transceiver, band status monitor by scope display, various filter settings, interference reduction function etc., can be easily set from PC, and possible to perform comfortable communication.

Yaesu FTDX101D Series Links.-

https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=959169DE998192AB87295E90077D740D&DivisionID=65&isArchived=0

https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=BA2F414449407A4D3D23461143F88429&DivisionID=65&isArchived=0

Yaesu FT-DX101 Options Link.-

http://www.hamradio-shop.co.uk/product-category/yaesu-accessories/

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
Alt Text LAMCO New/Second Hand Twelve Months Warranty.
Near The Alhambra Shopping Centre.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store!
HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .
We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!

Yaesu FT-DX101D,

FT-DX101D,

Yaesu FTDX101D,

Yaesu FT-101 D,

Yaesu FT-DX101 D,

Yaesu FTDX101D,

 

 

 

Yaesu FT 2980R | VHF FM 80W Transceiver

FT-2980 DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Yaesu FT 2980 VHF FM Transceiver New LAMCO Barnsley.

Yaesu FT 2980 VHF FM Transceiver New LAMCO Barnsley.

yaesu-ft 2980 Amateur Radio Shops HAM Radio Dealer Supplier Retailer. Alt Text LAMCO New/Second Hand Twelve Months Warranty. Near The Alhambra Shopping Centre. Barnsley, South Yorkshire, UK. Amateur Radio Sales. HAM Radio Sales. We are Premier Dealers For Icom, Kenwood & Yaesu. hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK. Amateur radio Dealers, HAM radio dealers UK . We are a family business supplying world leading amateur radio equipment. We are small enough to care and large enough to cope!
FT-2980R 80 Watt Heavy-Duty 144 MHz FM Transceiver.

The improved FT 2980 now with 80 Watts of High power output! No Cooling Fan Needed, a huge, easy-to-read display, and one-touch WIRES™ Internet Linking Access capability are yours with the rugged new FT-2980R!

CTCSS and DCS Encode/Decode Built In
For easy repeater access, or silent monitoring of busy channels, both CTCSS and DCS (Digital Code Squelch) Encoder/Decoder circuits are built in. CTCSS and DCS configuration data may be stored independently in each memory channel.
A “Split Tone” mode also allows operation on systems where CTCSS and DCS are used separately on the repeater uplink/downlink.
Extensive Memory System.
The FT 2980 R provides a total of 221 memory channels, including 200 “regular” memories, ten pairs of band-limit memories, and an instant-recall “Home” channel you can dedicate to a frequently-used repeater or simplex frequency. Memories can store repeater shift information, CTCSS/DCS data, power output level, scanning status (“Skip”), and Alpha-Numeric labels.
Alpha-Numeric Channel Display.
Memory channels may be displayed either with the channel frequency or a personalized Alpha-Numeric label, for easy channel recognition. Up to six letters, characters, or numbers may be used for labeling channels.
WIRES Internet Linking Access Feature.
The FT 2980 R includes a conveniently-located “Internet” key, for quick access to Internet-linked repeater systems. Internet repeater linking allows you to use your FT 2980 R to talk to other Amateurs throughout the world, with outstanding voice signal quality. The “Internet” key may be configured to send either a single DTMF digit, or a DTMF string, for operation on a WIRES™ (Wide-Coverage Internet Repeater Enhancement System) repeater, or on other Internet-linked repeaters using DTMF tone access.
WX Channels.
A special 10-channel Weather Band memory bank is provided in the U.S. version, allowing quick access to NOAA weather broadcasts. When the 1050-Hz “Severe Weather” alert tone is transmitted, the FT-2980R may be configured to emit an alarm tone to get your attention quickly. With the “Weather Alert” feature enabled, the FT-2980R will scan the ten Weather memories, stopping only if the 1050-Hz tone is received.
Excellent Receiver Performance
The FT-2980R’s receiver front end features Yaesu’s renowned Advanced Track Tuning RF input filtering, which affords outstanding protection from Intermodulation distortion.
Large LCD Display
The large 6 digit backlit LCD on the Yaesu FT 2980 R ensure excellent visibility.
Loud Audio with Internal Speaker.
The FT-2980R packs 3W BIG watts of Loud Audio with its own Internal Speaker for those noisy environments.
Now with 80 Watts of Power Output.
80 Watts of Solid RF Power with No Cooling Fan Needed! Four selectable power output levels are provided: 80/30/10/5 Watts. The power selection may be stored into memory, allowing you to conserve power while using strong local repeaters.

Yaesu Product Page

Our Range of Yaesu Transceivers

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
Alt Text LAMCO New/Second Hand Twelve Months Warranty.
Near The Alhambra Shopping Centre.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store!
HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .
We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!

Yaesu FT-2980,
FT-2980,
FT 2980,
Yaesu FT 2980,

ICOM IC-9700 VHF/UHF/SHF SDR Transceiver

IC-9700 FREE ITEM DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

ICOM IC-9700 VHF UHF SHF D STAR Transceiver

ICOM IC-9700

Icom IC-9700 + FREE ITEMS LAMCO Barnsley HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Icom ic 9700 vhf uhf shf d star

[wa-wps id=’16141′]

Icom IC- 9700 2 Years Manufacturers Warranty.

VHF/UHF/1200 MHz SDR Transceiver

https://icomuk.co.uk/IC-9700/Amateur_Radio_Ham_Base_Stations

The ICOM IC-9700 is the first VHF/UHF/1200 MHz transceiver which introduces the RF direct sampling system for the 144 and 430 MHz bands, a real-time spectrum scope and waterfall function. The RF direct sampling system has already provided high performance in Icom’s IC-7610 and IC-7300 HF transceivers. In addition, the spectrum scope and waterfall function have been indispensable tools for operators to increase QSO opportunities, without missing weak signals. The radio has many other impressive features including a built-in 1200 MHz band, 4.3 inch TFT colour touchscreen display, full duplex with Dualwatch on separate bands, Satellite mode, D-STAR DV (Digital Voice) /DD (Digital Data) modes and Terminal/Access point modes. Also, a newly designed power amplifier and cooling system provide stable and high-efficiency operation, even when continuously transmitting for a long time.

The IC-9700 is also the perfect companion to the IC-7300 HF radio. Measuring the same size, both radios provide almost identical operation. Using the IC-9700 and IC-7300 creates the ultimate, compact radio station covering the VHF, UHF, HF and 1200 MHz bands.

The Icom IC-9700 is the only VHF/UHF all mode transceiver that enables a variety of VHF/UHF operation including DX, contests, satellite/EME and D-STAR.

144, 430, and 1200 MHz All Mode Transceiver Including Satellite, DV, and DD Modes
Without installing any option unit, you can enjoy Multi-band operation. The IC-9700 includes D-STAR (a digital voice and data protocol specification for amateur radio) DV and DD modes. In addition, Satellite mode is built-in! There are three antenna connectors for 144, 430, and 1200 MHz.

Incorporates Icom’s RF Direct Sampling System
The Icom IC-9700 adopts the RF Direct Sampling system (for 144 MHz and 430 MHz). In this system, signals are processed in the digital domain by the ADC and FPGA. This is different from legacy superheterodyne systems, where the signals are processed in a mixer that includes nonlinear elements. Therefore, the signal purity is very high, and clear audio can be generated. For 1200 MHz, the Down Conversion IF Sampling method is adopted.

Instinctive Operation with the Touch Screen
You can easily set the operating frequency or mode by touching the standby screen. The MENU screen allows you intuitively change settings including those for satellite communication or D-STAR operation. Entering Memory channel names is easy to do on the character input screen.

The Very First VHF/UHF Real-Time Spectrum Scope and Waterfall Display
This is the first time that a real-time spectrum scope and waterfall display comparable to an HF high tier transceiver have been introduced in a VHF/UHF transceiver. With the high-speed spectrum scope, you can instantly grasp your operating band condition and you can set the frequency to a destination signal with a simple touch on the screen. You can also view receive signal history using the waterfall display.

Independent Receiver, Full Duplex Operation
The Icom IC-9700 can simultaneously receive on two different bands, and two different modes. For example, you can receive on the 1200 MHz band in AM mode while receiving on the 144 MHz band in FM mode. This function will be a significant advantage when participating in contests, or DX hunting. Furthermore, the IC-9700 is Full Duplex which enables you to transmit on the main band while receiving on the sub-band allowing you to enjoy Satellite operation.

Audio Scope Function
Making good use of the Audio Scope function, various Audio characteristics, such as microphone compressor level, filter width, notch filter width, and keying waveform in CW mode can be monitored. Transmit or receive audio can either be displayed on the FFT scope and the oscilloscope.

Newly Designed Power Amplifier
The power amplifier outputs stable power with high efficiency (144/430 MHz band: 100/70 watts). The cooling system prevents the PA’s temperature from rising, even when operating for a long time. That enables reliable operation during contests. This amplifier is more energy efficient than previous models.

D-STAR Operating Functions
The Icom IC-9700 has the D-STAR Repeater (DR) function. The DR function can be used on both the main band and sub band. Moreover, by using the DD mode, you can browse the Internet through a repeater station.

Built-in “Remote” Function, Terminal mode and Access Point mode
A static IP address can be set to the transceiver. If you set a global IP address to your router, you can use the Terminal mode or Access Point mode without remote software applications.

Almost Identical User Interface to the IC-7300
The layout of the dials and keys and the menu screens are almost the same as the IC-7300. If you are familiar with the IC-7300, the IC-9700 will be easy to operate. The IC-9700 is the perfect side-by-side companion to the IC-7300, enabling operation from HF to 1200 MHz.

Comprehensive Menus for Satellite Operation
The selectable Main, Sub, Normal, and Reverse Satellite Screen menus make Satellite operation easier. Even in Satellite mode, you can use the high-quality spectrum scope.

Normal and Reverse Tracking functions
In addition to Reverse Tracking function there is also a Normal Tracking function that simultaneously increases or decreases both the downlink and uplink frequencies in the same steps.

AFC function
Automatic Frequency Control follows the frequency change caused by the Doppler effect thus maintaining a stable receive condition.

Up to 99 Satellite Memory channels
The IC-9700 has 99 satellite memory channels that allow you to store both uplink and downlink frequencies and operating mode.

Other functions
• Large and clear audio
• Compatible with the RS-BA1 Version 2 (Built-in server function) and CI-V commands
• Digital Twin PBT
• CW functions: Full break-in, CW memory keyer, CW reverse, CW auto tuning
• SD card slot
• TX/RX audio recording
• Screen capture…and more.

Output power:
144 MHz
430/440 MHz
1200 MHz
Modulation system:
SSB
FM
AM
DV
DD
Spurious emissions:
144 MHz
430/440 MHz
1200 MHz
Carrier suppression:
Unwanted sideband:
Microphone impedance:
<SSB/CW/FM/RTTY/DV/DD>
0.5–100 W 0.125–25 W
0.5–75 W 0.125–18.75 W
0.1–10 W 0.025–2.5 W
Digital PSN modulation
Digital Reactance modulation
Digital Low Power modulation
Digital GMSK Reactance modulation
Digital Quadrature modulation

Less than –63 dB Less than −60 dB
Less than –61.8 dB Less than −60 dB
Less than −53 dB Less than −50 dB
More than 50 dB
More than 50 dB
600 Ω
TRANSMITTER
144.000–148.000, 430.000–450.000, 1240.000–1300.000 MHz
144.000–146.000, 430.000–440.000, 1240.000–1300.000 MHz
SSB, CW, RTTY, AM, FM, DV, DD
107 (99 Simplex + 6 Program scan edges + 2 CALL) × 3 bands,
99 (Satellite) , 2000 (DR function)
144 MHz SO-239 (50 Ω),
430/440, 1200 MHz Type-N (50 Ω)
13.8 V DC ±15% (Negative ground)
TX Less than 18 A (High power)
RX 1.2 A typical (Standby), Less than 1.8 A (Maximum audio)
−10 °C to + 60 °C; 14 ˚F to 140 ˚F
Less than ± 0.5 ppm (–10°C to + 60°C; 14˚F to 140˚F)
1 Hz
240 × 94 × 238 mm, 9.4 × 3.7 × 9.4 in (W × H × D, projections not included)
4.7 kg, 10.4 lb (approximate)
Frequency coverage:

Mode:
Number of channels:
Antenna connectors:
Power supply requirement:
Power consumption:
Operating temperature range:
Frequency stability:
Frequency resolution:
Dimensions:
Weight:
GENERAL
144, 430/440, 1200 MHz ALL MODE TRANSCEIVER
|9700
Version 2
Receiver system:
Intermediate frequency:
Sensitivity (Preamp: ON, Filter: SOFT):
SSB/CW (10 dB S/N)
AM (10 dB S/N)
FM (12 dB SINAD)
DV (1% BER) (PN9)
DD (1% BER) (PN9)
Selectivity (Filter: SHAPE):
SSB (BW=2.4 kHz)
CW (BW=500 Hz)
RTTY (BW=500 Hz)
AM (BW=6 kHz)
FM (BW=15 kHz)
DV (12.5 kHz spacing)
DD (300 kHz spacing)
Spurious and image rejection ratio:
SSB/CW
AM/FM/DV
DD
Audio output power:
144, 430/440 MHz RF Direct Sampling
1200 MHz Down Conversion IF Sampling
311–371 MHz (1200 MHz)
Less than 0.11 μV
Less than 1.0 μV
Less than 0.18 μV
Less than 0.35 μV
Less than 1.59 μV
More than 2.4 kHz/−3 dB, Less than 3.6 kHz/−60 dB
More than 500 Hz/−3 dB, Less than 700 Hz/−60 dB
More than 500 Hz/−3 dB, Less than 700 Hz/−60 dB
More than 6 kHz/−3 dB, Less than 15 kHz/−60 dB
More than 12 kHz/−6 dB, Less than 20 kHz/−60 dB
More than −50 dB
More than −40 dB
144, 430/440 MHz More than 70 dB, 1200 MHz More than 50 dB
144, 430/440 MHz More than 60 dB, 1200 MHz More than 50 dB
1200 MHz More than 50 dB
More than 2.0 W (1 kHz, 10% distortion) into an 8 Ω load
RECEIVER
■ REAR PANEL
144 MHz Antenna Connector 430/440 MHz Antenna Connector
DC Power Socket 1200 MHz Antenna Connector
LAN Port 10 MHz reference signal input
Accessory Socket Data Jack
USB/B Port CI-V Remote Control Jack
KEY Jack External Speaker Jack MAIN
External Speaker Jack SUB Ground Terminal

D-STAR (Digital Smart Technology for Amateur Radio) is a digital radio protocol developed by JARL (Japan Amateur Radio League). Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries. This product includes “zlib” and “libpng” open source
software, and is licensed according to the open source software license. Android and Google Play are registered trademarks or trademarks of Google Inc. All other trademarks are the properties of their

Available Icom IC-9700 Options Are As Below

https://www.hamradio-shop.co.uk/?s=sp-38&post_type=product&dgwt_wcas=1

https://www.hamradio-shop.co.uk/?s=sm-30&post_type=product&dgwt_wcas=1

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
Alt Text LAMCO New/Second Hand Twelve Months Warranty.
Near The Alhambra Shopping Centre.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store!
HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .
We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!

Icom IC 9700,

Icom IC-9700,

IC-9700,

IC9700,

IC 9700,

VHF UHF SHF Transceiver,

Icom IC9700,

2M 70CM 23CM Transceiver,

Yaesu FT-65 E | VHF UHF Dual Band Handheld

FT-65E DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Yaesu FT-65 E LAMCO Barnsley VHF Dual Band Handset

Yaesu FT-65 E – VHF/UHF 2 Meter/70cm Dual Band FM Handheld Transceiver

Yaesu-FT-65

Yaesu FT-65 E 3 Years Warranty

Yaesu FT-65 E dual-band 2 meter/440 MHz has three output power levels:  5, 2.5 or 0.5 watts. Receive coverage is 65-108 (FM broadcast band), 136-174 and 400-500 MHz. The FT-65E is compact and light, yet ruggedly constructed. The speaker provides a full 1 Watt of powerful, clear audio.
The supplied 1950mAh Li-ion battery pack is capable of up to 9 hours operation. The optional SBR-26LI 2500mAh Li-ion battery provides up to 11.5 hours of expanded operation (TX 6 seconds, RX 6 seconds, Standby 48 seconds). The SBH-22 2.5-hour rapid charger is included. The newly designed large white LED display is vibrant and highly visible. Four programmable Quick Recall Keys (QRK) store and recall favorite frequency settings and to be used as short-cut keys to Set Mode menu items. VOX operation is available with the optional SSM-512B earpiece microphone.
Other features include versatile scanning modes Programmable VFO Scan, Memory Scan, Priority Channel Scan, and Weather Alert Scan, WX Channels with “Severe Weather” Alert, PC Programming, Transceiver-to-Transceiver Cloning, FM Broadcast Receiver, Automatic Range Transponder System (ARTS), CTCSS/ DCS Operation, Busy Channel Lockout (BLCO), Automatic Power Off feature, and Transmitter Time Out Timer (TOT). The new FT-65E meets demanding commercial grade specifications. Size: 2.1 x 4.1 x 1.2 inches (less knobs and antenna) 9.2 oz.
The FT-65E comes with: SBR-254 Li-ion 7.4V 1950 mAh battery, SAD-20B AC adapter, SBH-22 rapid charger, antenna, SHB-18 belt clip and operating manual.
Commercial Grade VHF / UHF
The FT-65R is built to commercial grade standards, including the IP54 Rating for Dust and Water protection, and the MIL-810-C,D and E standards making this radio suitable for operation in the harshest of environments.
Powerful Outputs
With 5 Watts of reliable RF output power this radio is sure to be heard. Never miss a call with One watt of Crisp, Clear Audio output from the oversized front panel speaker.
High Capacity Li-Ion battery
Packaged with a powerful 1950 mAh Li-Ion battery pack, giving the radio over 9 hours of operating time, or upgrade to the optional High-Capacity 2500 mAh Li-Ion battery pack for over 11.5 hours of extended operating time. To ensure minimal down time the Yaesu FT-65 E also comes packaged with a 3.5-Hour Rapid charger.
QRK (Quick Recall Key)
Four Dedicated User programmable Keys serve as short cut keys to preferred menu options, or use the four dedicated recall keys to quickly and easily store and recall desired frequencies.
Versatile Scanning Capabilities
Programmable VFO Scan scans all channels in the desired frequency range, Memory scan allows scanning of user selectable frequencies, Priority Channel Scan can be used to scan memory channels while making one channel a priority. Weather Alert scan alerts the user when severe weather is approaching.
PC Programmable
The Yaesu FT-65 E is capable of being programmed directly from a PC making all of the advanced setup features a breeze using the optional software and SCU-35 programming cable.
More Advanced features
Tons of advanced features are loaded into this compact radio including: Transceiver to Transceiver cloning with the optional SCU-36 clone cable, FM Band receiver equipped, ARTS (Automatic Range Transponder System), DTMF operation, CTCSS/DCS operation, TOT (time out timer) and more.

https://www.hamradio-shop.co.uk/product/yaesu-ssm-17b/

https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&encProdID=79E6683CC766565D2CB197C293AB6219

Yaesu FT 65 E, FT-65E, Yaesu FT-65E

Yaesu FT-70DE | VHF UHF Handheld Transceiver

FT-70DE DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Yaesu FT-70DE VHF UHF Handheld Transceiver LAMCO Barnsley

Yaesu FT-70DE C4FM FDMA / FM 144/430 MHz Dual Band 5W Handheld Transceiver

The Yaesu FT-70 DE is a compact and very attractively priced Yaesu System Fusion transceiver providing both conventional analog FM operation and the advanced C4FM Digital mode.

Yaesu ft-70d

The Yaesu  FT-70DE provides up to 5W of reliable RF power, and it’s large front speaker delivers 700mW of audio output. C4FM has better Bit Error Rate characteristics than other digital modulations the user can expect exeptional audio quality.

the new digital Yaesu FT-70DE includes Yaesu’s unique Automatic Mode Select (AMS) function. AMS detects the operating mode of the recieved signal as C4FM digital or analog FM, and then automatically and instantly switches the reciever to the appropriate mode. Users do not need to manually change between the nodes.

The multi-coloured LED mode-indicator displayed on the front allows the operator to easily see what mode the FT-70DE is in any given moment. LED Mode-Indicator clearly and visibly shows the transmit/recieve mode by changing its colour so that the operating mode of the transceiver is easily recognised at a glance.

One of the other distinguishing features of the FT-70DE is a Digital Group Monitor (GM) with DG-ID and DP-ID. DG-ID (Digital Group Identification) and DP-ID (Digital Personal Identification) are useful features now included in the FT-70DE, to simplify the GM operation. Simply put, the transceiver selecting the same DG-ID or DP-ID can communicate with each other. Between 00 and 99 DG-ID and DP-ID are selctable; which provides loads of flexibility so that users can enjoy group communication with friends in GM mode in accordance to their individual operational needs.

Other included standard features and functions are; IP-54 Rating (Dust/Water Protection) construction, wide band recieve coverage of 108-579.99.5MHz, Versatile Scanning Capabilities such as Programmable VFO Scan, Memory Scan, and Priority Channel Scan, External DC Jack for DC supply operation and to Charge the battery, Mini USB port for convienent programming the software updates, CTCSS/DCS Operation, Automatic Power Off (AFO) feature, RF Squelch, Transmitter Time Out Timer (TOT) and Busy Channel Lock-Out (BCLO).

Radio Features:

Commercial Grade VHF / UHF

The FT-70DR is built to commercial grade standards, including the IP54 Rating for Dust and Water protection, making this radio suitable for operation in the harshest of environments.

Wide band receive coverage

108 MHz – 580 MHz, continuous reception for aircraft bands, public service channels, etc.

Versatile Scanning Capabilities

Programmable VFO Scan, scans all channels in the desired frequency range, Memory scan allows scanning of user selectable frequencies, Priority Channel Scan can be used to scan memory channels while making one channel a priority. Weather Alert scan alerts the user when severe weather is approaching.

Automatic Mode Select (AMS)

The Automatic Mode Select function detects the receive signal mode
The transceiver automatically selects one of the four communication modes according to the signal received. This is extremely convenient when listening for communications, as you do not need to be aware of the other party’s communication mode. The transceiver can also be operated in a fixed communication mode.

More Advanced Features

Other advanced features include: External DC Jack for DC Supply Operation and to Charge the Battery, Mini USB
port for convenient programming and software updates, CTCSS/ DCS Operation, Automatic Power Off (APO)
feature, RF Squelch, Transmitter Time Out Timer (TOT) and Busy Channel Lock-Out (BCLO).


– FM Friendly Digital Operation with AMS (Automatic Mode Select)
– Sophisticated C4FM Digital Functions : Digital Group Monitor (GM) / DG-ID, DP-ID Operation *1
*1 DG-ID: Digital Group Identification, DP-ID: Digital Personal Identification
– 5 Watts of Reliable RF Power inside a Compact body
– 700 mW Loud Audio Output and Clear Voice
– Large Multi-Color Mode Indicator
– Rugged Construction Meets IP54 (Dust / Water protection)
– Huge 1,105 Channel Memory
– Wide Band Receive Coverage 108 – 579.995 MHz
– Versatile Scanning Capabilities: Programmed VFO Scan, Memory Scan, Priority Channel Scan
– 7.4 V 1,800 mAh Lithium Ion Battery pack (SBR-24LI) Included
– Equipped with External DC Jack for DC Supply and Battery Charge
– Equipped with Mini USB port for Convenient Memory Management and Software updates
– Transceiver-to-Transceiver Cloning with Optional Cloning Cable (CT-27)
– CTCSS/DCS Operation
– RF Squelch
– Automatic Power-Off (APO) Feature
– Transmitter Time-Out-Timer (TOT)
– Busy Channel Lock-Out (BCLO)

Supplied Accessories:
Antenna
7.4 V 1,800 mAh Lithium Ion Battery Pack (SBR-24LI)
Battery Charger (SAD-11)
Belt Clip
USB Cable
Warranty Card
Operating Manual

Specifications:
Frequency Ranges: RX 108 – 137 MHz (Air Band)
137 – 174 MHz (144 MHz HAM)
174 – 222 MHz (VHF1)
222 – 420 MHz (VHF2)
420 – 470 MHz (430 MHz HAM)
470 – 579.995 MHz (UHF band)
TX 144 – 146 MHz
430 – 440 MHz
Circuit Type: Double-Conversion Superheterodyne
Modulation Type: F2D, F3E, F7W
RF Power Output: 5 W/2 W/0.5 W (@7.4 V or EXT DC)
AF Audio Output: 700 mW (@16 ohms 10 % THD: Internal speaker)
Case Size (W x H x D): 60 x 98 x 33 mm w/o Knob and Antenna
Weight (Approx.): 255 g with SBR-24LI and Antenna
Warranty: 3 Years

Manufacturer Link-

https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=249&encProdID=7CDB93B02164B1FB036530FBD7D37F1A&DivisionID=65&isArchived=0

Options.-

https://www.hamradio-shop.co.uk/product/yaesu-sbr-24li/

https://www.hamradio-shop.co.uk/product/yaesu-ct-44/

 

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
Alt Text LAMCO New/Second Hand Twelve Months Warranty.
Near The Alhambra Shopping Centre.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store!
HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .
We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!

Yaesu FT-70,

FT 70,

Yaesu Fusion,

Yaesu FT-70DE,

FT 70DE,

Yaesu FT 991A + SP-10 | Transceiver and Speaker Bundle Deal

991A SP10 YAESU supplied by LAMCO Barnsley my favourite HAM store in the world 5 Doncaster Road Barnsley S70 1TH

Yaesu FT 991 A LAMCO Barnsley+ SP-10

Yaesu FT 991 A

HF 50 144 430 Mhz All Mode Transceiver

yaesu ft-991 combo

 

Yaesu FT 991 A is the next-generation of the widely popular FT-991. Like its predecessor, the FT-991A is creatively designed to fit into a very compact (W9.0″ xH3.2″ x D9.3″) rugged case and will deliver up to 100 Watts solid output power (50 Watts on 144/430MHz) on SSB, CW, AM, FM, Packet and C4FM Digital LAMCO Barnsley on the popular HF/50/144/430MHz Bands.

In keeping with the spirit of the rich performance of the FT-991, the new FT-991A provides two new stimulating and useful advanced features – a Real-time Spectrum Scope and a Multi-Colour Waterfall Display.

 

The new dynamic real-time spectrum scope gives radio operators the ability to graphically view the location of signals on the band while they listen to the received audio allowing them to quickly move to the desired signal. The strength of signals on the band can readily be seen on the multi-colour waterfall display. Chronological order colour differentiation allows operators to easily recognise weak signals at a glance; signals that might otherwise be missed on the spectrum scope.

These additional exciting functions enable more efficient and satisfying operating time while making important contacts on the crowded HF and 6metre bands. We believe that the new FT-991A will be widely accepted as an ideal field gear rig by the majority of the ham radio operators who want to enjoy reliable and flawless communication on all the HF and V/UHF bands with just one radio.

The new FT-991A naturally contains all the features packed into the original version of the FT-991 including a 3kHz Roofing Filter for the triple conversion receiver that effectively attenuates interfering signals and enables outstanding performance while still producing high quality audio. The 32bit high speed floating point DSP provides effective cancellation and reduction (DNR) LAMCO Barnsley of random noise, and the Auto Notch (DNF) automatically eliminates QRM caused by dominant beat tones while the receiver’s Contour function and APF (Audio Peak Filter) can be used to further reduce undesired noise. A built-in 3.5inch full-colour touch screen high resolution display allows stress-free operability and visibility. for further detailed information, please refer to the attached specification sheet.

Yaesu FT-991A Transceiver Only Page

Yaesu Product Page

Our Range of Yaesu Transceivers