Acom 1010 HF Amplifier USED | 90 Days Warranty

£1499.00

USED

12 months warranty

£1499.00

Out of stock

Email when stock available

Out of stock

Email when stock available

Acom 1010 HF Amplifier USED | 90 Days Warranty

 

Acom 1010 HF 700W Linear Amplifier offers frequency coverage for all amateur bands in the 1.8-29.7MHz range. It has a power output of 700W PEP or 500W continuous carrier. The intermodulation distortion is better than 35dB below the rated output, and the hum and noise are better than 40dB below the rated output. The harmonic output suppression is better than 50dB below the rated output. The input and output impedances are 50 Ohm unbalanced, with UHF (SO239) type connectors. LAMCO UK The input circuit is broadband with a VSWR of less than 1.3:1 from 1.8-30MHz continuously. The bypass path VSWR is less than 1.1:1 from 1.8-30MHz continuously, with a maximum power of 200W. The output impedance matching capability can handle VSWR up to 3:1 or higher. The RF gain is typically 11dB, with a frequency response of less than 1dB from 50 to 70W drive power for rated output. The primary power can be 85-132V/170-264V AC, with various nominal taps available. It complies with CE safety and electromagnetic compatibility requirements, as well as FCC regulations with provided band locks. The size and weight of the amplifier when operating are 406x315x150mm and 18kg (16×12.4×5.9 inches and 39.7lbs). It can operate in temperatures ranging from 0 to +50 degrees Celsius, with humidity up to 95% at +35 degrees Celsius. It can operate at heights up to 3000m above sea level without output deterioration. Antenna matching can be achieved in less than 10 seconds and at a quarter of nominal output power, reducing the risk of interference and ensuring the safety of the amplifier components. E&OE

USED

12 months warranty

YOU MAY ALSO LIKE

document.addEventListener("DOMContentLoaded", function() { const searchInput = document.querySelector("#dgwt-wcas-search-input-1"); // Target FiboSearch input by ID if (searchInput) { searchInput.addEventListener("keydown", function(event) { if (event.key === "Enter") { event.preventDefault(); // Block default Enter key behavior console.log("Enter key disabled for FiboSearch"); } }); } else { console.log("FiboSearch input not found"); } });