In stock
Kenwood TS-50S HF transceiver small as it is packs a maximum output of 100W and is packed with sophisticated features normally associated with larger rigs. It includes a general coverage receiver 500KHz to 30MHz, 100 memory channels and Direct Digital Synthesizer (DDS) with ‘fuzzy’ logic control. It also has auto-mode capability, full break-in and semi break-in operation for the CW enthusiast. Also provided is CW reverse mode which reverses the pitch of interference competing with the CW signal, allowing the operator to approach the desired signal from either side.
It provides split frequency operation for DX applications with dual VFOs (A and B) with VFO data stored independently for each band. Kenwood’s AIP (Advanced Intercept Point) further enhances the receiver performance with a significantly reduced noise floor level. User-friendliness is all important with the versatile menu system which is also accessable via the supplied microphone.
Matched with the optional external AT-50 Automatic ATU band data is transferred to the tuner, so there is no need to operate the AT-50 directly, it’s all controlled from the TS-50S.
* 1.8 -30MHz (160m-10m ham Bands) TX
* 500kHz – 30MHz Gen Coverage Rx
* SSB, CW, AM, FM, FSK
* 100W SSB, CW, FM, FSK
* 25W AM * Dual VFOs (A and B)
* 100 memories * Versatile menu system
* DDS Direct Digital Synthesizer)
* Quick memory * 15 band pass filters
* CW reverse mode
* All-mode squelch * Noise lanker
* 2W audio (8 Ohms)
* 13.8V DC
* 179 x 60 x 233mm * 2.9kg
