ICOM IC-7610 HF/50Mhz SDR Transceiver Combo

ICOM IC 7610 + FREE ITEMS ICOM UK JAN 24 HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

ICOM IC-7610 | SDR HF/50MHz Transceiver LAMCO Barnsley.

ICOM IC-7610 HF/50 MHz SDR Transceiver.

SDR HF/50MHz Transceiver

Whether it is poor band conditions, or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the capability of your receiver. One key factor is the RMDR capabilities, the ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610 introduces dual RF direct sampling receivers, achieving 110dB RMDR, rivalling that of top-of-the-line transceivers.

Innovative RF Direct Sampling System
Introduced with the IC-7300, Icom’s RF Direct Sampling System has made SDR performance affordable. Direct Sampling means incoming RF signals are digitized by the Analog-to-Digital Converter and immediately processed by the FPGA (Field-Programmable Gate Array). This process dramatically reduces distortion that naturally occurs in the various mixer stages found in traditional superheterodyne receivers.

Astonishing 110 dB* RMDR
The RF Direct Sampling system in the IC-7610 is capable of 110 dB RMDR. This performance gives you the ability to pull weak signals out of the noise of strong adjacent signals. There is a difference you can hear as the desired signal comes out of the pileup!
* Representative value at 2 kHz frequency separation (Received frequency: 14.2 MHz, Mode: CW, IF BW: 500 Hz)

Customized VCXO Is Used for the Master Clock
Reducing phase noise in a receiver is always a challenge as it is a natural characteristic of a receiver. The master clock of the IC-7610 utilises a low phase noise VCXO (Voltage Controlled Crystal Oscillator), combined with Icom’s years of technical expertise to design a common power supply for the VCXO and FPGA, yielding an ultra-low phase noise. Also, a 10 MHz reference signal can be input to the IC-7610 for higher precision.

Independent Dual Receiver
Whether listening to both sides of a rare DX station running split or looking for a multiplier on a different band or mode, the dual receivers in the IC-7610 have you covered. Two separate DIGI-SEL preselectors, two separate Band Pass Filter networks, feed two independent A/D converters into the FPGA.

DIGI-SEL for Main and Sub Bands
The DIGI-SEL preselectors are RF filters with sharp, narrow passband characteristics preventing Analog-to-Digital Converter overflow from large out-of-band signals when sampling the RF signals. Additionally, the third and higher order IMD components are reduced. This is ideal when strong signals are received in a contest pile-up or from broadcast stations on adjacent frequencies or bands.

High-Quality Speaker Sound
To finish out the receiver is an internal speaker cabinet. The cabinet is tuned to reproduce clear, natural sounding audio, and is insulated from the radio chassis to prevent noise from vibration and panel resonance.

Digital-Up-Conversion (DUC) for Clean TX –70
Breaking with the tradition of mixing a carrier signal with a local oscillator, a Digital-Up-Conversion (DUC) method is used to generate the required signal from the Digital-to-Analogue Converter. The chart to the right shows the difference made by this new design.

Built-in Automatic Antenna Tuner
The built-in automatic antenna tuner memorises its settings based on your transmit frequency so that it can recall the tuning setting when you switch operating bands. The emergency tuner function* enables you to work for short periods of time with an antenna with a high SWR.
* Output power not guaranteed and power may be reduced.
7-inch Colour Display with Touch Screen Function
The large 7-inch colour display shows various operating and setting information at a glance in high resolution (800 × 480 pixels.) The display shows multiple features, for example, the dual spectrum scope aligned vertically or horizontally, simulated analogue meters and RTTY, PSK31/63 mode decoded messages.

Dual Receivers, Dual Spectrum Scopes
The IC -7610 provides dual reception, on different bands, as does the high-speed, high-resolution spectrum scopes. Whether watching for a band opening, working a rare DX station operating split, or searching for a multiplier, the ability to watch each receiver separately allows the operator to concentrate on pulling in a weak signal. The scopes provide class-leading performance in resolution, sweep speed and a 100 dB dynamic range. To navigate around the band easier, connect a PC mouse to the USB port for point and click tuning of the receivers.

Audio Scope Flexibility
The Audio Scope screen shows both an FFT scope with a waterfall along with an oscilloscope for both transmit and receive audio. This makes it easy to monitor AF characteristics such as microphone compressor level, filter width, notch filter, and in CW, you can monitor received CW keying waveforms.

Touch Screen and Multi-Dial Knob for Smooth Operation The combination of the touchscreen and the multi-dial knob offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item by touching the screen and can adjust the levels by turning the multi-dial knob.

Remote Encoder for Second VFO Knob
The optional RC-28 remote encoder enables you to add an external Sub dial for controlling the Sub-band. Main band and Subband can be switched with the F1 and F2 buttons and can be controlled with the RC-28. The LED above the F1 and F2 buttons turns ON to show the active band.

DVI-D Connector for an External Display Connection
The IC-7610 has a DVI-D connector for an external display. Operating frequency, setting information and spectrum scope can be observed on a large external screen.

SD Card Slot and USB Port for Saving Data
When used with an SD card or USB flash drive, various contents including firmware updates, memory channels, captured screen images, and other personal settings, can be saved and loaded. TX/RX audio, voice memories, RTTY/CW memories and RTTY decode logs can be saved and used on the SD card.

I/Q Signal Output
The IC-7610 enables you to output I/Q signals from the USB connector. They can be used to analyse a spectrum range or to decode signals by a decoder software on a PC.
*This function will be provided in a future firmware update

Simplified Remote Control for RS-BA1
Whether from a remote part of your home QTH, or on a remote location somewhere around the world, the RS-BA1 software enables you to operate your IC-7610. Not only can you control the radio settings and have both RX/TX audio paths, but you are also able to display a single band spectrum scope with the waterfall. With the addition of an Ethernet connector, a base station computer is not required.

Innovative RF Direct Sampling System achieves 110dB (typical) of RMDR at 2kHz frequency separation.
Independent Dual Receiver monitors two bands simultaneously.
DIGI-SEL Pre-selector firmly shuts out interference.
High-speed, High-resolution, Real-time Spectrum Scope.
7-inch Colour Display with Touch Screen Function.
Built-in, High-speed Automatic Antenna Tuner.
New, large, loudspeaker housing design gives superior sound quality, making the most of the high-purity received signal.
Digital IF filter and twin PBT for interference rejection.
IP remote control connection with Ethernet connector.

Suitable Icom IC-7610 accessories are as below.-

If Your Budget Cant Quite Stretch To An Icom IC-7610 Try Its Little Brother Below.-

https://www.hamradio-shop.co.uk/product/icom-ic-7300-sdr-transceiver/

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.

Alt Text LAMCO New/Second Hand Twelve Months Warranty.

Near The Alhambra Shopping Centre.

Barnsley, South Yorkshire, UK.

Amateur Radio Sales.

HAM Radio Sales.

We are Premier Dealers For Icom, Kenwood & Yaesu.

hamradio-shop is my favourite HAM store!

HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.

Amateur radio Dealers, HAM radio dealers UK.

We are a family business supplying world leading amateur radio equipment.

We are small enough to care and large enough to cope!

Icom IC-7610,

IC-7610,

Icom IC 7610,

IC 7610,

IC7610,

Icom IC7610,

7610,

An Icom IC-7610,

HF 50Mhz Transceiver,

SDR Transceiver,

https://icomuk.co.uk/IC-7610/Amateur_Radio_Ham_Base_Stations

https://www.hamradio-shop.co.uk/product/icom-sm-50/

Yaesu FT-991A HF/50/145/430Mhz Transceiver

FT-991A DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Yaesu FT-991A HF VHF UHF All Mode Fusion Transceiver

Yaesu FT-991A HF VHF UHF All Mode Fusion Transceiver.

Yaesu FT-991A ALL-BAND, MULTIMODE PORTABLE TRANSCEIVER

The FT-991A is the next generation in all mode, all band MF/HF/VHF/UHF transceiver with C4FM (System Fusion) Digital capability. The FT-991A includes multi-mode operation on CW, AM, FM, SSB, and Digital Modes (Packet, PSK31, RTTY and C4FM), with 100 Watts of HF/50mhz Capability (50 Watts VHF/UHF).

The New FT-991A now includes a high-resolution full color 3.5″ TFT Touch panel for superior operability and visibility, incorporating a High Speed Spectrum and High Resolution real-time scope with ASC (Automatic Spectrum-scope control) built right in.

The FT-991A is designed for the most competitive operating situations, with a suite of new features to enhance the experience. Whether you primarily operate at home, mobile or in the field, the FT-991 will provide outstanding fundamental performance plus give you easy access to the full range of exciting modes available on the ham bands today.

FT-991A ALL-BAND, MULTIMODE PORTABLE TRANSCEIVER

FT-991A ALL-BAND, MULTIMODE PORTABLE TRANSCEIVER

Real-time Spectrum Scope with Automatic Scope Control (ASC)
The new dynamic real-time spectrum scope gives radio operators the ability to graphically view the location of signals on the band while they listen to the received audio allowing them to quickly move to the desired signal. The strength of signals on the band can readily be seen on the Multi-color waterfall display. Chronological order color differentiation allows operators to easily recognize weak signals at a glance; signals that might otherwise be missed on the spectrum scope.

Advanced Spectrum Scope with ASC (Automatic Spectrum-Scope Control) located just below the LCD display gives the operator all the information for comfortable QSO on the DXing scene.
Multi-color waterfall display
The FT-991A now includes a Real-time Multi-colored waterfall display that enables you to quickly and easily identify and pick out signals without the need to mute the receive audio.
State of the art 32-bit Digital Signal Processing System
Recognizing an all-important Golden Rule Amateur Radio – “You cannot work them if you cannot hear them”– the FT 991 features a rugged state-of-the-art highly balanced receiver circuit configuration. The high-speed floating point TMS320C6746 DSP chip (3000 MIPS / 2250 MFLOPS) from Texas Instruments used in the receiver design guarantees excellent interference rejection with actual signals under real-world conditions, not only on HF but also in the VHF and UHF bands.
3kHz Roofing Filter for enhanced performance
The FT-991A now includes a 3Khz roofing filter for the triple conversion receiver that effective attenuates interfering signals and enables outstanding performance while still producing high quality audio.
3.5 Inch Full Color TFT
The FT-991 could not provide functions easier than at your fingertips with a 3.5″ Full Color TFT Display for Superior Operability and Visibility.
USB Capable
The FT-991 can be connected to a computer using a USB cable for CAT control and firmware updates, or the use of an integrated SCU-17 Interface Unit to support USB Audio In/Out, TX Control (PTT, Key, Shift).
100 Watts of Solid Performance
The RF Amplifier in the FT-991 provides a clean and solid 100 Watts of Operating Power (50 Watts VHF/UHF) and is combined with a large heat-sink and forced air automatic cooling fan to increase operating time and prevent overheating.
Compact, Lightweight & Portable
The FT-991 Comes in a compact, lightweight package suitable for portable, mobile and base installations. Measuring 8.8″(W) x 3″ (H) x 9.9″ (L) at just 9.7 pounds this robust full featured mobile/portable radio is ready to go when and where you are!
Internal Automatic Antenna Tuner
Internal High Speed Automatic Antenna Tuner included in the package. The antenna tuner uses a LC switching network that has a large capacity 100 channel memory. The tuning data is automatically memorized to reduce tuning time when changing frequency.
High Accuracy TCXO
+/-0.5PPM High Resolution DDS/PLL local Oscillator included as part of the standard package.
Specifications
Frequency Ranges: RX 30 kHz – 56 MHz, 118 MHz – 164 MHz, 420 MHz – 470 MHz (specified performance, amateur bands only)
TX 1.8 MHz – 54 MHz, 144 MHz – 148 MHz, 430 MHz – 450 MHz (amateur bands only)
Circuit Type: Triple-Conversion Superheterodyne: SSB/CW/AM
Double-Conversion Superheterodyne: FM/C4FM
Modulation Type: A1A(CW), A3E(AM), J3E(LSB, USB), F7W(C4FM), F3E(FM),
F1D(PACKET), F2D(PACKET)
Power Output: SSB/CW/FM AM Carrier
160- 6 Meters: 100 W 25 W
2 Meters/70 Centimeters: 50 W 12.5 W
Case Size(W x H x D): 9.0″ x 3.2″ x 9.3″ (w/o knob and connector)
Weight: 9.5 lb
Warranty: 3 Years
Supplied Accessories
Hand Microphone (MH-31A8J)
DC Power Cord
Spare Fuse (25A)
Operating Manual
Warranty Card

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
Alt Text LAMCO New/Second Hand Twelve Months Warranty.
Near The Alhambra Shopping Centre.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store!
HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .
We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!

Yaesu FT-991A,

FT-991A,

FT 991,

FT 991A,

Yaesu FT 991A,

Yaesu FT 991 A,

Yaesu M-100 Top Microphone

Yaesu M-70 Top Microphone

Yaesu M1 Desk Top Microphone

http://www.yaesu.co.uk/product_info.php?cPath=179_201&products_id=1269

https://www.hamradio-shop.co.uk/product-category/yaesu-accessories/

Yaesu FT 891 | HF 50 Mhz Mobile Transceiver

FT-891 DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Yaesu FT 891 HF 50 Mhz Mobile Transceiver.

Yaesu FT 891 Mobile Transceiver.

3 Years Manufacturers Warranty.

Yaesu FT 891 offers up to 100 watts of HF/6m output power with efficient dual internal fans, supplied by lamco coupled with Yaesu’s legendary receiver design,triple conversation with a 1st IF frequency of 69.450MHz for really outstanding performance supplied by lamco.

Yaesu FT 891 Amateur Radio Shops HAM Radio Dealer Supplier Retailer. LAMCO New/Second Hand Twelve Months Warranty. Near Jnc 36 M1 Motorway. Barnsley, South Yorkshire, UK. Amateur Radio Sales. HAM Radio Sales. We are Premier Dealers For Icom, Kenwood & Yaesu. hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK. Amateur radio Dealers, HAM radio dealers UK . We are a family business supplying world leading amateur radio equipment. We are small enough to care and large enough to cope!

3KHz roofing filter equipped as standard.

Detachable front panel for convenient mounting and operation.

Specifically designed external antenna tuner FC-50 (optional).

Ease of operation.

Large diameter main tuning dial with torque adjustment.

Pop-up menu for quick and easy operation.

Multi-Function knob.

Large transmit/receive indicator.

3 x programmable front panel function keys.

Up to 100 watts output power.

Yaesu FT 891 provides a stable 100 W (25 W AM) high power output.

High reliability is assured by the transmitter careful circuit design with efficient thermostatically-controlled dual internal fans and the diecast chassis.

Yaesu FT 891 Real IF DSP provides effective and optimized QRM rejection.

The 32 but high speed floating point DSP (max 3000 MIPS) provides effective cancellation/reduction (DNR) of the random noise that is frequently frustrating in the HF frequencies.

Also the AUTO NOTHC (DNF) automatically eliminates the dominant beat tone.

The CONTOUR and the APF are very effective receiver noise reduction tools in the HF bands operations.

The YAESU original DSP QRM and noise reduction functions are provided.

Yaesu FT 891

Specifications.-

Frequency Range: Tx: 1.8 – 54 MHz (Amateur Bands) Rx: 30 KHz – 56 MHz.

Channel Step: 2/5/10 Hz (SSB, CW), 10/100 Hz (AM,FM).

Frequency Stability: +/- 0.5 ppm 14 °F to + 122 °F (-10 °C to +50 °C).

Modes of Emission: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM).

Impedance: 50 Ohms, unbalanced.

Supply Voltage: 13.8VDC +/- 15%, negative ground.

Current Consumption: Rx: 2.0 A (Signal Present) Tx: 23 A.

Operating Tempature Range: 14 °F to ° +122 °F (-10 °C to +50 °C).

Case Size (WxHxD): 6.1 x 2.0 x 8.6 (155 x 52 x 218 mm) w/o Knobs.

Weight (Approx.): 4.18 lb (1.9 kg).

Output Power: 100W SSB/CW/FM (AM: 25W).

Circuit Type: SSB/CW/AM: Triple-conversion Super-heterodyne FM: Double Conversion Super-heterodyne.

Intermediate Frequencies: 1st: 69.450 MHz / 2nd: 450 KHz.

Maximum AF Output: 2.5 W 4 ohmz with 10% THD.

Audio output Impedance: 4 to 16 Ohms (8 Ohms nominal).

Sensitivity: SSB/CW 0.158uV (1.8 /30 MHz), 0.125uV (50 /54 MHz).

Yaesu FT-891 Further Info

Available Yaesu FT 891 Options Are As Below.-

Yaesu FC 50

Yaesu MH 36E8J

Yaesu FH 2

Similar Yaesu Transceivers.-

Yaesu FT 857D

Yaesu FT 450D

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.

LAMCO New/Second Hand Twelve Months Warranty.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .

We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!

Yaesu FT891,

Yaesu FT 891 Mobile Transceiver,

Mobile Transceiver,

ICOM IC-7300 | You Pay At the Checkout £1291.95

IC-7300 FREE ITEM DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

ICOM IC-7300

Icom IC-7300

Icom IC-7300 New With 2 Years ICOM UK Warranty

Please be aware some UK dealers are retailing Grey Imports and the Icom IC 7300 will not be covered by warranty at Icom UK.

Please Be Aware:The wide band transmit option is available on this unit but the modification will invalidate the manufacturers’ warranty.

The Icom IC-7300 is a revolutionary compact radio that will excite HF operators from beginners to experts. This new model has a high-performance real-time spectrum scope and employs a new RF direct sampling system. The IC-7300’s real-time spectrum scope provides top-level performance in resolution, sweep speed and dynamic range. While listening to received audio, the operator can check the real-time spectrum scope and quickly move to the intended signal. The combination of the real-time spectrum scope and waterfall function improves the quality and efficiency of HF operation.

The new RF direct sampling system employed by the IC-7300 realises class leading RMDR (Reciprocal Mixing Dynamic Range) and Phase Noise characteristics. In addition, the IC-7300 features the 70MHz band (European versions only), a large touch screen colour TFT LCD, convenient multi-function dial knob, automatic antenna tuner, voice recorder function and more.

Class Leading Real-Time Spectrum Scope
You no longer have to choose whether to listen to the audio or have the spectrum scope sweep for signals as the IC-7300’s real-time spectrum scope offers the simultaneous operations found in higher tier models. This means you can use either the spectrum scope or the waterfall to quickly move to an intended signal while listening to the receiver audio. The IC-7300’s touch screen introduces a “Magnify” function. So, when you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune.

High-Resolution Waterfall Function
The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of the Icom IC-7300 and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope.

Audio Scope Function
The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either the transmit or receive audio can be displayed on the FFT scope with the waterfall function and the oscilloscope.

RF Direct Sampling System
The IC-7300 employs an RF direct sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading technology making an epoch in amateur radio.

New “IP+” Function
The new “IP+” function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion.

Class Leading RMDR (Reciprocal Mixing Dynamic Range) & Phase Noise Characteristics
The IC-7300’s RMDR is improved to about 97dB* (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals.
* At 1 kHz frequency separation (received frequency: 14.2MHz, MODE: CW, IF BW: 500Hz)

Large Touch Screen Colour TFT LCD
The large 4.3 inch colour TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents.

Multi-Dial Knob for Smooth Operation
The combination of the multi-dial knob and the touch screen offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item with a touch of the screen and adjust levels by turning the multi-dial knob.

SD Memory Card Slot for Saving Data
The IC-7300 can store various contents into SD card such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Personal and firmware updating data can also be stored to the SD card for easy setting.

15 Discrete Band-Pass Filters
The Icom IC-7300 has 15 discrete RF band-pass filters. The RF signal is only passed through one of the band-pass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters.

Built-In Automatic Antenna Tuner
The antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function* allows a wide range of temporary antennas to be tuned.
* Do not use the Enforced Tuning function except in case of an emergency. Transmission power may be reduced.

Superior Sound Quality
To offer superior sound quality, a new speaker unit has been incorporated and is allocated dedicated space in the aluminium die-cast chassis.

Other Features
• New HM-219 hand microphone supplied
• Effective large cooling fan system
• A Multi-function meter
• 101 memory channels (99 regular, 2 scan edges)
• Optional RS-BA1 IP remote control software (the spectrum scope with the waterfall can be observed)
• CW functions: Full break-in, CW reverse, CW auto tuning.

Links.-

https://icomuk.co.uk/ic-7300/amateur_radio_ham_base_stations

https://www.hamradio-shop.co.uk/product/icom-sm-30/

https://www.hamradio-shop.co.uk/product/icom-sp-38/

Icom IC-7300,

IC-7300,

Icom IC 7300,

IC 7300,

7300

ICOM IC-2730E | VHF/UHF Dual Band Mobile Transceiver

IC-2730 DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Icom IC-2730E VHF UHF Dual Band Mobile Transceiver.

Icom IC-2730E

Icom IC-2730E VHF/UHF Dual Band Mobile Transceiver
The Icom IC-2730E is the latest Amateur radio product from Icom to provide optional Bluetooth capability. This stunning new VHF/UHF dual band mobile transceiver provides VHF/VHF, UHF/UHF simultaneous receive capability as well as VHF/UHF receive. An independent tuning knob, separate controller and large display makes it ideal for easy, intuitive mobile operation.

Optional VS-3 Bluetooth Headset
The optional VS-3 Bluetooth headset can wirelessly control the IC-2730E with three programmable and PTT buttons and provides VOX operation for hands-free communication.
* Optional UT-133 Bluetooth® unit must be installed in the IC-2730E.

Large Easy-to-See, Backlit Display
The IC-2730E display is 1.5 times larger than its predecessor, the IC-E2725 and features a white backlight providing higher contrast.

Easy Vehicle Mounting with Optional MBF-1
The combination of the optional MBF-1 suction cup mounting base and MBA-5 controller bracket provides easy tilt and swivel adjustments for mobile operation. The large suction cup can be mounted to dashboards or other flat surfaces and can be removed easily.

HM-207, Remote Control Microphone
The supplied remote-control microphone, HM-207 allows you to control various settings from the microphone. The backlit buttons help with operation in low light conditions.

VHF/VHF, UHF/UHF Simultaneous Receive Capability
The IC-2730E is a dual band transceiver, which provides VHF/VHF, UHF/UHF simultaneous receive capability as well as VHF/UHF receive. Simple one-touch of a button allows you to change between the main (transmit) band and sub band.

Controller Attachment to the Main Unit with Optional MBA-4
With the optional MBA-4 combination bracket, the controller can be attached to the main unit. The microphone jacks are mounted on both the controller and main unit allowing you to connect the microphone to either unit.

Independent Controls for Each Band
Main dials, volume, squelch knobs and primal buttons are symmetrically laid out. Various operations including frequency tuning can be made smoothly and straightforwardly.

Other Features
• Wide frequency coverage, 118–136.975MHz (AM/AM-N), 137–174MHz and 375–550MHz (FM/FM-N)
• 50W output power on both VHF and UHF bands
• 104 DTCS and 50 CTCSS tone codes
• Split tone function allows you to encode and decode different CTCSS/DTCS tones
• 1000 memory channels, 2 call channels and 50 scan edges with 8-character channel name
• Cross band repeater capability
• Free download PC programming software, CS-2730
• Versatile scanning capability
• Squelch delay and squelch attenuator
• Sub band auto mute function
• Sub band busy beep function
• Auto power off
• Time-out-timer
• 16 DTMF auto dial memories
• CI-V remote control capability (through OPC-478UC)

VHF/UHF Dual Band Mobile Transceiver

The IC-2730E is the latest Amateur radio product from Icom to provide optional Bluetooth capability. This stunning new VHF/UHF dual band mobile transceiver provides VHF/VHF, UHF/UHF simultaneous receive capability as well as VHF/UHF receive. An independent tuning knob, separate controller and large display makes it ideal for easy, intuitive mobile operation.

Optional VS-3 Bluetooth Headset
The optional VS-3 Bluetooth headset can wirelessly control the IC-2730E with three programmable and PTT buttons and provides VOX operation for hands-free communication.
* Optional UT-133 Bluetooth® unit must be installed in the IC-2730E.

Large Easy-to-See, Backlit Display
The IC-2730E display is 1.5 times larger than its predecessor, the IC-E2725 and features a white backlight providing higher contrast.

Easy Vehicle Mounting with Optional MBF-1
The combination of the optional MBF-1 suction cup mounting base and MBA-5 controller bracket provides easy tilt and swivel adjustments for mobile operation. The large suction cup can be mounted to dashboards or other flat surfaces and can be removed easily.

HM-207, Remote Control Microphone
The supplied remote-control microphone, HM-207 allows you to control various settings from the microphone. The backlit buttons help with operation in low light conditions.

VHF/VHF, UHF/UHF Simultaneous Receive Capability
The IC-2730E is a dual band transceiver, which provides VHF/VHF, UHF/UHF simultaneous receive capability as well as VHF/UHF receive. Simple one-touch of a button allows you to change between the main (transmit) band and sub band.

Controller Attachment to the Main Unit with Optional MBA-4
With the optional MBA-4 combination bracket, the controller can be attached to the main unit. The microphone jacks are mounted on both the controller and main unit allowing you to connect the microphone to either unit.

Independent Controls for Each Band
Main dials, volume, squelch knobs and primal buttons are symmetrically laid out. Various operations including frequency tuning can be made smoothly and straightforwardly.

Other Features
• Wide frequency coverage, 118–136.975MHz (AM/AM-N), 137–174MHz and 375–550MHz (FM/FM-N)
• 50W output power on both VHF and UHF bands
• 104 DTCS and 50 CTCSS tone codes
• Split tone function allows you to encode and decode different CTCSS/DTCS tones
• 1000 memory channels, 2 call channels and 50 scan edges with 8-character channel name
• Cross band repeater capability
• Free download PC programming software, CS-2730
• Versatile scanning capability
• Squelch delay and squelch attenuator
• Sub band auto mute function
• Sub band busy beep function
• Auto power off
• Time-out-timer
• 16 DTMF auto dial memories
• CI-V remote control capability (through OPC-478UC)

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.

LAMCO New/Second Hand Twelve Months Warranty.
Near Jnc 36 M1 Motorway.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .

We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!

Links.-

https://icomuk.co.uk/IC-2730E/Mobile_Amateur_Radio_Ham

https://www.hamradio-shop.co.uk/product/icom-ut-133/

https://www.hamradio-shop.co.uk/product/icom-vs-3/

https://www.hamradio-shop.co.uk/product/icom-mba-4/

Icom IC-2730D

Icom IC-2730D,

Icom UT-133,

Icom VS-3,

IC 2730D

2730,

Yaesu DR 2 XE | Dual Band C4FM/FM Digital Repeater

DR2XE FT2DE YAESU supplied by LAMCO Barnsley my favourite HAM store in the world 5 Doncaster Road Barnsley S70 1TH

Yaesu DR 2 XE | Dual Band C4FM/FM Digital Repeater | LAMCO Barnsley

Yaesu DR 2 XE -1 144/430 DYaesu DR 2 XEual Band C4FM/FM Digital Repeater

The YAESU DR-2 is a digital/conventional FM dual mode repeater that covers the VHF and UHF amateur radio bands. It was developed for use with System Fusion. Replacing your conventional FM repeater with the DR-1 will provide continued use of conventional FM communication while integrating the use of digital communication functions through its unique AMS capability.

Easy Migration
The repeater controller, receiver and transmitter are all packaged into a 19” standard cabinet rack mount panel unit for simple replacement of an existing repeater. Existing peripheral devices such as the duplexer and amplifier, etc., can continue to be used as-is.

Please see the DR-1 Brochure and Manual for installation examples of Repeater Set-Up replacing existing Analog FM Repeater
DR-1 Features
•Modulation Modes: Conventional FM, 12.5 kHz C4FM Digital (V/D Mode, VFR Mode, DFR Mode) *
•AMS (Automatic Mode Select) function automatically recognizes the signal as C4FM digital or conventional FM, and then the DR-1 repeater retransmits the signal using the preset communications mode.
•3.5-inch Full Color Touch Panel Operation
•Extremely reliable, high RF Output Power: 50W/20W/10W
•Emergency Operation: Supports auto-switched backup battery power operation.
•Front panel microphone connector is provided for use in repeater transmitter testing, and enables use as a base station.
•Built-in large-size monitor speaker with front panel volume control

*System Fusion is not compatible with the D-STAR GMSK digital format.
User Friendly Set-Up
The large front panel, color touch-screen permits convenient configuration of the transmitter and receiver frequencies, transmit power output and AMS functions. When the settings are complete the display can be switched off to prevent accidental operation. Simply turn the display switch ON and use the touch panel screen to confirm or change settings. The transmit and receive frequencies, CTCSS tones, squelch, AMS, and other functions are configured by the touch panel screen
Touch Panel Operation
Enjoy the ease of using the DR-1X 3.5-inch Full Color Touch Panel Operation:
• Setup screen
• Frequency setting screen
• CTCSS setting screen
Other Feature
•Internal AC Power Supply
•19″ Rack Mount Available
•High Stability ±2.5ppm TCXO included
•DSQ (Digital Squelch Code) Signaling Feature
•CTCSS and DCS Signaling Feature
•ID Announcement Feature
•Remote Controller Interface
•Base Station Operation
•Time Out Timer
•Firmware Updates
DR-1 Supplied Accessories
•AC Cable
•DC Cable for backup battery
•PC Connection Cable SCU-20
•Rubber Feet (4)
DR-1 Options
•DTMF Microphone MH-48A6JA
•Hand Microphone MH-42C6J
•Voice Guide Unit FVS-2
DR-1 Specifications
Frequency range 144 to 148 MHz, 430 to 450 MHz
Channel steps 5/6.25 kHz
Emission type F1D, F2D, F3E, F7W
Frequency stability ±2.5 ppm (-4°F to +140°F (-20°C to +60°C))
Antenna impedance 50 ohms
DC 11.7 to 15.8 V, negative ground
Current consumption:
1.5 A (Receive)
13 A (50 W TX, 144 MHz band)
14 A (50 W TX, 430 MHz band)
Operating temperature -4°F to +140°F (-20°C to +60°C)
Dimensions: 19″(W) × 3.5″(H) × 15″(D)
Weight : 22.05 lbs (10 kg) approximately

Transmitter
RF power output 50/20/5 W
Modulation type F1D, F2D, F3E Variable Reactance Modulation
F7W 4FSK (C4FM)
Spurious emission At least 60 dB below

Receiver
Circuit type Double conversion super-heterodyne
Intermediate frequencies 1st: 47.25 MHz, 2nd: 450 kHz
Receiver sensitivity
0.3 .V (Digital 2 m/70 cm) BER 1%
0.2 .V (FM 2 m/70 cm) 12dB SINARD
Adjacent Channel Selectivity Better than 65 dB TYP (20 kHz offset)
Selectivity FM 12 kHz/35 kHz (-6 dB/-60 dB)
Intermodulation Better than 65 dB TYP (20 /40 kHz offset)
Audio output 4 W (4ohm., THD 10%, 13.8 V; internal speaker)

Options, Yaesu FT-1DE, Yaesu FTM-400, Yaesu FVS-2.

ICOM ID-5100 Vanilla | VHF UHF D-STAR Transceiver

ID-5100 DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

ICOM ID-5100 Vanilla VHF UHF D-STAR Transceiver LAMCO Barnsley

VHF/UHF Dual Band Digital Transceiver.

VHF/UHF Dual Band D-STAR Digital Transceiver

Icom ID-5100 Vanilla.

Icom ID-5100 2 Years ICOM UK Warranty

Also Available: https://www.hamradio-shop.co.uk/product/icom-id-5100-deluxe/

Icom’s new ID-5100E VHF/UHF dual band D-STAR digital mobile transceiver enhances core features found in the celebrated IC-2820H mobile and incorporates the user-friendly technology found in the IC-7100. The radio features a large responsive touch screen and also integrated GPS, optional Bluetooth connectivity and support for Android devices.

Intuitive Touch Screen Operation
The intuitive touch screen interface provides quick and smooth operation for setting and editing various functions and memories. The 5.5 inch display (320 × 128 pixel) shows a large easy-to-see software keypad (Qwerty keyboard), and allows you to input alphanumeric characters quickly.

VHF/UHF, VHF/VHF, UHF/UHF Dual Receive
The Icom ID-5100E receives 118–174MHz and 375–550MHz* with dual receiver capability that allows you to receive two bands simultaneously (including within a single band)*. Almost all VHF & UHF communications are available to you!

DV Dualwatch
The ID-5100E has simultaneous receive for FM/FM and FM/DV modes, and the capability of monitoring two DV signals. The main band audio has priority, if two DV signals come in at the same time.

Integrated GPS receiver
The ID-5100E has an integrated GPS which allows you to transmit and receive position data from the built-in GPS receiver. Position, course, speed and altitude are shown on the display. The GPS position information can be used for exchanging position reports, tracing the GPS log and searching for nearby repeater sites. The GPS antenna is located in the remote head, no external GPS antenna required.

DV/FM Repeater List Function
The DV/FM repeater list function assists you in accessing near-by repeaters, even where you are visiting an area for the first time. The function searches for near-by repeaters using the repeater memories with the GPS position information. To use the repeater list function, the position data of the repeater is required in the repeater list.

Dplus Reflector Linking
Dplus Reflector link commands are added to the DR function to allow easy reflector operation. Use Reflector, link/unlink to Reflector, echo test and repeater information commands are selectable.

Manufacturer Link https://icomuk.co.uk/ID-5100E/Mobile_Amateur_Radio_Ham

Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
LAMCO New/Second Hand Twelve Months Warranty.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .
We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!

Icom ID-5100,

Icom ID 5100,

ID-5100,

ID 5100,

Icom ID5100,

ICOM ID-5100 Deluxe | VHF UHF D-STAR Transceiver | LAMCO

Icom ID-5100 Deluxe VHF UHF D-STAR Transceiver LAMCO Barnsley

Icom ID 5100 D-STAR Full Monty with Bluetooth and mounting kit.

VHF/UHF Dual Band Digital Transceiver.

VHF/UHF Dual Band D-STAR Digital Transceiver

Icom’s new ID-5100 E VHF/UHF dual band D-STAR digital mobile transceiver enhances core features found in the celebrated IC-2820H mobile and incorporates the user-friendly technology found in the IC-7100. The radio features a large responsive touch screen and also integrated GPS, optional Bluetooth connectivity and support for Android devices.

ID-5100E Deluxe*
Includes Bluetooth features and mounting equipment: MBF-1 Suction cup mounting bracket; MBA-2 controller bracket; MBR-100 Trunion mount; UT-133 Bluetooth unit and VS-3 Bluetooth headset. Saving £126 (inc.VAT)!
*Versions differ outside of UK

VHF/UHF, VHF/VHF, UHF/UHF Dual Receive
The Icom ID-5100 Deluxe E receives 118–174MHz and 375–550MHz* with dual receiver capability that allows you to receive two bands simultaneously (including within a single band)*. Almost all VHF & UHF communications are available to you!

DV Dualwatch
The Icom ID-5100 DEluxe E has simultaneous receive for FM/FM and FM/DV modes, and the capability of monitoring two DV signals. The main band audio has priority, if two DV signals come in at the same time.

Integrated GPS receiver
The Icom ID-5100 Deluxe E has an integrated GPS which allows you to transmit and receive position data from the built-in GPS receiver. Position, course, speed and altitude are shown on the display. The GPS position information can be used for exchanging position reports, tracing the GPS log and searching for nearby repeater sites. The GPS antenna is located in the remote head, no external GPS antenna required.

UT-133 Bluetooth® Unit (Option)
This The UT-133 is the optional Bluetooth® board necessary for operation with the optional VS-3 headset and the optional RS-MS1A, Android™ application.

VS-3 Bluetooth® Headset (Option)
The optional Bluetooth® headset, VS-3, can be used for hands-free communication and remotely control the ID-5100E with three programmable buttons. Providing you with convenient communication in a vehicle.

RS-MS1A Android™ Application (Free Download Application From Google Play™)*
Connect to the Icom ID-5100E for remote control of DR functions, link with a map application and send/receive messages and images over the DV mode. You can download the free Android RS-MS1A application from Google Play Store.
*Optional UT-133 Bluetooth unit must be installed in the ID-5100E. Some functions may be subject to Android phones and devices used.

Other Features
• Menu-driven user interface
• DTMF via microphone or ID-5100 display
• SD Card slot for voice and data storage
• Enhanced D-PRS functions with object, position, item and weather formats
• Convenient memory contents management using CSV data format
• Speech function announces operating frequency, mode and received callsign (DV mode)
• Independent main dial, volume and SQL knobs for A/B bands
• AM airband dualwatch
• CS-5100, cloning software supplied
• 50W output power on both VHF and UHF bands

Supplied Standard Accessories
• Hand microphone, HM-207
• Controller cable, OPC-837 (3.5 m; 11.4 ft)
• Microphone hanger
• CD (CS-5100 and instruction handbook PDF)
• Spare fuse

https://www.hamradio-shop.co.uk/product/icom-ut-133/

https://www.hamradio-shop.co.uk/product/icom-vs-3/

https://www.hamradio-shop.co.uk/product/icom-mbf-1/

https://www.hamradio-shop.co.uk/product/icom-mba-2/

Maufacturer Link

https://icomuk.co.uk/ID-5100E/Mobile_Amateur_Radio_Ham

Icom ID-5100,

Icom ID 5100,

ID-5100,

ID 5100,

Icom ID5100,

ICOM IC-7100 HF/50/70/145/430Mhz Transceiver

IC-7100 DEC 22 HAM Radio Shop HAM Radio Shops Amateur Radio Shops Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

ICOM IC-7100 HF/VHF/UHF D Star Transceiver LAMCO Barnsley

In 1995, almost two decades ago, Icom changed the way radio hams thought about mobile HF communication with the introduction of the IC-706. Since that time, the Icom Mobile HF radios have been the Performance HF mobile radio of choice. Now, at the 2012 Tokyo Hamfair, Icom has once again changed mobile HF communications with the introduction of the IC-7100.

70MHz Band in European Versions
A first for an Icom transceiver, the IC-7100 is designed to the 70MHz band in European versions where now, 70MHz is open to Amateur radio enthusiasts.

Touch Screen Control Portal
An amateur radio first! The radio control head features a large, multi-function, “touch screen”‘ DOT-Matrix LCD display that is positioned for easy view and operation. This is an important feature as the controller display not only provides information, but is your control portal to the IC-7100’s feature settings and menus.

Control Head
Breaking the the concept that a radio panel should be flat, the IC-7100’s control head is designed for an optimal view angle for the LCD as well as the spacing for large fingers, and plenty of room to have a large internal speaker along with a CW keyjack, phone/speaker, microphone, and control cable.

D-STAR READY
The IC-7100 provides D-STAR DV mode digital voice and low speed data communication.

IF DSP Features
The latest 32-bit floating point DSP supports many digital processing features such as digital IF filter, twin PBT, manual notch filters. Of course, those highgrade digital processing features work on all ham bands, from HF to the 70cm band.

Other Features
• Built-in SD Card Slot for voice storage and data cloning
• Dual DSP chips deliver versatile digital processing performance
• Built-in RTTY demodulator and decoder
• Multi-function meter
• SWR graphic display
• DSP controller RF speech compressor
• Total of 505 memory channels
• Voice recording and playback functions
• 70-70.5MHz coverage, 50W output power (for Europe versions only, varies according to version.)
• 0.5ppm high frequency stability
• Optional RS-BA1 IP control remote control software

Supplied Accessories
• Hand microphone
• DC power cable
• Electronic keyer plug
• Spare fuses
• Key plug
• ACC cable
• Separation cable

Manufacturer Link.-

https://icomuk.co.uk/IC-7100/Mobile_Amateur_Radio_Ham

Accessory Link.-

http://www.hamradio-shop.co.uk/product-category/icom-accessories/

Amateur Radio Shops HAM Radio Dealer Supplier Retailer LAMCO New/Second Hand Twelve Months Warranty Barnsley, South Yorkshire, UK. Amateur Radio Sales. HAM Radio Sales.We are Premier Dealers For Icom, Kenwood & Yaesu. hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK. Amateur radio Dealers, HAM radio dealers UK We are a family business supplying world leading amateur radio equipment.We are small enough to care and large enough to cope!

Icom IC-7100,

IC-7100,

IC7100,

Icom IC7100,

IC 7100,

Icom IC 7100,

Yaesu G-5500DC | Rotator

Yaesu g-5500 HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Yaesu G-5500DC | Rotator

Yaesu G-5500DC Azimuth-Elevation Rotator Systems

Yaesu G-5500DC Azimuth-Elevation Rotator Systems are specially designed to accommodate horizontal cross-booms to mount pairs of VHF and UHF directional antennas for space communications. Providing simultaneous control of 450 degrees of azimuth rotation and 180 degrees of elevation rotation, they are perfect for EME (moon bounce) and satellite communications installations. The G-5500DC dual controller lets you adjust and keep track of both aspects of the antenna system’s positioning. The 120 VAC controller includes an interface jack for computer control, supported by the optional GS-232A Computer Controller, as well as many aftermarket control programs and interfaces.

These azimuth and elevation rotators are actually two separate motor units, now DC-controlled. They may be mounted together on a mast with the included mast bracket, or independently with the azimuth rotator inside a tower and the elevation rotator mounted on the mast above the top of the tower. They handle a total of about 10 sq. ft. of antenna wind load and rotate each way in about one minute.

The Yaesu G-5500 AZ-EL clamshell rotator design utilizes 98 heavy 7/16-inch dual-stacked circumferential ball bearings to distribute the load over the full diameter of the housing. This design minimizes stress and wear, and practically eliminates the possibility of destructive water entry: there is no shaft hole in the top of the housing. Yaesu’s factory-lubricated rotator units are housed in Melamine resin-coated die-cast aluminium intended to provide maintenance-free operation under all climatic conditions.

IMPORTANT NOTE: Beginning in 2019 the new Yaesu G-5550DC azimuth and elevation motors operate with two independent 22 V DC control lines, each a five-wire system, using the same connectors at the end of the control cable as the previous models. Both of the new DC motors, azimuth, and elevation, are marked “G-5550DC” at the connector. Be sure to mark your connectors as AZ or EL. The rear panel of the controller is titled “G-5500DC” on the serial number label.

WARNING: The legacy Yaesu G-5500 Rotator motors and controller used a 26 VAC control voltage, six-wire system. Therefore, old AC controllers are NOT compatible with new DC rotator motors, and new DC controllers are not compatible with old AC rotator motors.

All control cable assemblies for all modern Yaesu rotator systems use the same connectors with “1 to 1 pin-out” connector wiring. Therefore, older cable assemblies are compatible with the new Yaesu G-5500DC components, which only use pins 1, 2, 3, 4 and 5 in each connector. For control cable runs less than 125 ft. use a five-conductor, 20 gauge control cable (5 x 20 AWG). If the rotator cable needs to be longer than 125 ft. then use five-conductor 18 gauge cable (5 x 18 AWG). The input voltage for the G-5500DC controller is labelled “117 VAC” to indicate the house current range of 110 to 120 Vac.

When you are launching your EME or satellite communications adventure, an azimuth/elevation combination rotator is a vital tool for your antenna system. As durable as they are attractive, Yaesu G-5500DC Azimuth-Elevation Rotator Systems are available from DX Engineering.

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.